Using The Reset Button - Panasonic KX-TDA50 Installation Manual

4.1 Troubleshooting
4.1.4

Using the Reset Button

If the Hybrid IP-PBX does not operate properly, use the Reset Button. Before using the Reset
Button, try the system feature again to confirm whether there definitely is a problem or not.
Notes
• When the System Initialize Switch is set to the "NORMAL" position, pressing the
Reset Button causes the following:
•
•
•
•
•
Other data stored in memory, except the above, are not cleared.
• When the Reset Button is pressed with the System Initialize Switch in the "SYSTEM
INITIALIZE" position, all data stored in memory are cleared.
Operation
If the Hybrid IP-PBX does not operate properly:
1.
Set the System Initialize Switch to the "NORMAL" position.
2.
Press the Reset Button.
RUN Indicator
ALARM Indicator
142 Installation Manual
Camp-on is cleared.
Calls on hold are terminated.
Calls on exclusive hold are terminated.
Calls in progress are terminated.
Call park is cleared.
Reset Button
System Initialize Switch