Advertisement
Setting the Hospitality Option Data
➣
Depending on Model and Region, some menu are NOT exist at TV set.
To Enter: Press the
MUTE
→ 1 → 1 → 9 → ENTERE buttons in order.
To Exit from this menu : power off and turn on again.
Hotel TV Function
No
Description
Category
initial value
1
Hospitality Mode
Standalone
Select the Hotel TV mode. (Standalone / Interactive)
2
SI Vendor
OFF
Select the SI Vendor
Set the default values, which will be applied when the
TV is turned on.
Power On Channel
Last Saved
- User Defined : Refers to the settings configured for
EN
Power On Channel, Channel Type.
- Last Saved : Refers to the last saved settings.
Power On Channel
1
TV will turn on to this particular Channel.
Provides channel Type description for Power On
channel selected.
Channel Type
ATV
i.e.Selected channel analog or Digital & Antenna
selection(Air or Cable).
Set the default volume values which will be applied
when the TV is turned on.
3
Power On
Power On Volume
Last Saved
- User Defined : Uses the settings configured for
EN
Power On Volume.
- Last Saved : Uses the last saved settings.
Power On Volume
10
TV will turn on with this Volume Level.
Min Volume
0
Minimum Volume Level setting user can set
Max Volume
100
Maximum Volume Level setting user can set
Power On Source
TV
Select the Input source when TV is turned on initially.
Power On(AC Power On) Option
- Standby : Stand-By Mode
Power On Option
Last Option
- Power On : Power On
- Last Option : Last Power On State
User can set channel option.
Channel Setup
Such as Auto Tunning, Manual Tunning, Antenna setting.
Provided option for editing Channel Name , Number and video
Channel Editor
Mute settings for channels in channel List.
Mix Air and Cable Channels
ON: Both of Air and Cable can watch and display in
Mixed Channel Map
ON
Channel Map
OFF: Through Channel Map only can select Air or Cable
channel to watch
Off : No Check of the DTV Program channel information.
(DTV channel editor accessible, but addtional channel
4
Channel
Dynamic SI
OFF
Program number auto update not supported)
On : Check the DTV Program channel information. (DTV
channel editor inaccessible)
This is a display option for the OSD text that appears
when a user configures the country specifications in
hotel models. This option determines whether to activate
the items that are only executed after a manual user
confirmation when the notification message is displayed
Channel Rescan
ON
while the country specifications are being configured.
Message
On - When TV has an event for setting change because of
country spec, It will be shown on the screen.
Off - Even TV has an event for setting change, because of
country spec, it will not be shown on the screen.
Hotel TV Function
No
Description
Category
initial value
Widget Mode
OFF
Widget Mode On and Off
Vendor
Select the solution type (It depends on model -Vendor
Solution Type
Server
Server,SINC Server).
Server URL Setting
-
Setting the server URL.
License Server IP
-
Setting the server IP.
Setting
18
Widget
Use the IPTV mode (it depends model - Only IPTV
IPTV Mode
OFF
model support it).
Use the virtual standby mode or not.
Virtual Standby
OFF
When Virtual Standby On, TV power consumption will
be 9.5W to 17.4W (Depends on inches).
Room Num Setting
-
Setting Room Num
Door Eye function ON and OFF (Only for Hong Kong
Door Eye Mode
OFF
model)
Select the source that will display the door image.
Door Eye Source
AV1
(Source selection depends on Model)
Prompt OSD mode ON and OFF
On: The OSD which is asking if you want the output will
19
Door Eye
be displayed.
- If the user press 'Yes', door image will be displayed in
Prompt OSD
ON
PIP or Full screen.
- If the user press 'No', Door Eye function will not work.
Off: OSD will not be displayed and automatically changed
to PIP or Full size screen
Setting the time that decide how long will be
Source Return Time
7s
displayed the door image.(3s~20s)
Enter Self Diagnosis Menu.
- Picture Test: Use to check for picture problems. If
the problem appears in the test picture, select Yes
Self Diagnosis
and follow the directions on the screen.
-
for TV
- Sound Test: Use the built-in melody sound to check
for sound problems. If the problem occurs during
the test, select Yes and follow the directions on
the screen.
HD Function Check Menu
20
Service
Self Diagnosis for
On Executing Item Below OSD is displayed-
-
HTV
STB SI Vendor Setting : Si Name Ok/Failure
Bathroom AMP : Ok/Failure
SW UPGRADE
SW USB Update function
Service Pattern
OFF
Same function with SVC Service Pattern
TV Reset
-
Factory reset
[HG690_QSG]BN68-04956E-04Eng.indd 2
Hotel TV Function
No
Description
Category
initial value
Mychannel En
OFF
Set the My channel function ON/OFF.
5
MyChannel
Genre Editor
-
User can set the genre for searched channel.
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
ON : Main Menu display
Menu Display
ON
Menu
OFF: Main Menu No display
6
OSD
ON: Channel menu display
Channel Menu
OFF
OFF: Channel menu no display
Display
(Only for Hong Kong model)
Front panel(Local key) operation on/off.
- Unlock: Unlock All panel key.
- Lock: Lock All panel key.
7
Operation
Panel Button Lock
Unlock
- OnlyPower : Lock All panel key except Power panel key.
- Menu/Source : Lock Menu and Source panel keys.
Front panel(Local key)only can realize Volume+/-
,Channel+/-, Power ON/OFF function
Selection of the way to update clock data
- Manual: Use clock data from DVB channel or manual
Local Time
Manual
clock setting When the TV is in the stand-alone mode.
- TTX: manual clock setting (with updating from TTX data).
8
Clock
WakeUp:Timer type is wakeup mode.Set specific time
for the TV to turn on automatically
Timer Type
WakeUp
OnOff: Timer type is On and Off mode.Set TV to turn
itself on or off automatically at a specified time
(Only for Hong Kong model)
To get music output from an mp3/audio player through
an AV Input Source. When on, you can hear sound from
Music Mode AV
OFF
the player through the TV even there is no video signal.
The TV's backlight, however, remains on. And add a
video signal,it works normally.
To get music output from an mp3/audio player through a
PC Input Source. When on, you can hear sound from the
Music Mode PC
OFF
player through the TV even there is no video signal. The
TV's backlight, however, remains on. And add a video
Music
9
signal,it works normally.
Mode
To get music output from an mp3/audio player through a
Component Input Source. When on, you can hear sound
Music Mode Comp
OFF
from the player through the TV even there is no video
signal. The TV's backlight, however, remains on. And
add a video signal,it works normally.
Music Mode
OFF
Backlight On/Off option in Music mode to save energy
Backlight
Licence
Hotel TV Function
No
Description
Category
initial value
If the jack priority is set, the corresponding source is
7610 Priority AV
1
automatically set when a jack is inserted according to
the jack priority
If the jack priority is set, the corresponding source is
7610 Priority PC
2
automatically set when a jack is inserted according to
the jack priority.
If the jack priority is set, the corresponding source is
7610 Priority HDMI
3
automatically set when a jack is inserted according to
External
the jack priority.
10
Device
7610 AV Option
AV1
Select RJP AV Source (Source selection depends on Model).
RJP HDMI Option
HDMI1
Select RJP HDMI Source (Source selection depends on Model).
ON: TV speaker sound will be mute. Sound will come out
through HDMI. You must connect the Sound Bar to hear
Sound Bar Out
OFF
the sound(HB690 model :HDMI1).
OFF: Sound will come out through TV speakers normally.
TV Video out On/ Off. Only support RF and AV mode.
Video out
ON
(Only for Hong Kong model)
When USB is connected to the TV,
- Default : Popup window appears.
USB Media Mode
Default
- Automatic : Enters the USB contents menu automatically.
- Disable : Neither the pop-up window nor the menu appears.
Users can set External Source Banner to On or Off.
On : When TV power On or Mode changed, TV will
External
External Source
11
ON
display the external source banner.
Source
Banner
Off : When TV power On or Mode changed, TV will
not display the external source banner.
On : When an external source is connected to the TV,
the TV will auto ident and switch to the input source.
Auto Source
OFF
PC : Auto Ident PC Input only.
Off : Auto Source is Off.
Set the return source after closing Anynet+.
Anynet+Return
Power On
Power On Src:Return to Power On Src
Source
Src
Last Source:Return to Last Source
Determines the Sub AMP operation mode.
- 0: Turns the Sub AMP function off (PWM off).
- 1: Determines the Sub volume according to the
main volume control.
Sub Amp Mode
2
Bathroom
That is, the sub volume is determined according to
12
Speaker
the Power On Volume, the Min Volume, and the Max
- 2: Determines the volume according to the
bathroom control panel setting.
Sub Amp Volume
6
Sub AMP Volume level at power on initial condition.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching
to other building materials, please contact your nearest dealer. If installed on a
ceiling or slanted wall, TV may fall and result in severe personal injury.
➣ Standard dimensions for wall mount kits are shown in the table below.
➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for
assembly are provided.
➣ Do not use screws that do not comply with the VESA standard screw specifications.
➣ Do not use screws that are longer than the standard dimension or do not comply with
the VESA standard screw specifications. Screws that are too long may cause damage
to the inside of the TV set.
➣ For wall mounts that do not comply with the VESA standard screw specifications, the
length of the screws may differ depending on the wall mount specifications.
➣ Do not fasten the screws too firmly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
➣ Samsung is not liable for product damage or personal injury when a non- VESA or
non-specified wall mount is used or the consumer fails to follow the product installation
instructions.
➣ Do not mount the TV at more than a 15 degree tilt.
➣ Always have two people mount the TV on a wall.
➣ Remove the screws from the Wall Mount hole,before installing the Wall Mount.(65 inch
model only)
VESA screw hole
Product
TV size in
specs (A * B) in
Standard Screw
Quantity
Family
inch(cm)
millimeters
32~40 inch
200 x 200
(81.3 ~ 101.6 cm)
HB690
M8
4
46~65 inch
400 x 400
(116.8 ~ 165.1 cm)
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
Hotel TV Function
No
Description
Category
initial value
This feature adjusts the brightness of the TV in order
to reduce power consumption.
- Off: Turns off the energy saving function.
Eco
13
Energy Saving
OFF
Solution
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high energy saving mode.
Welcome Message
OFF
Display Welcome Message.
Edit Welcome
-
Edit Welcome Message.
Message
User can set the logo display Off or the type of logo
Logo/
Hospitality Logo
OFF
file(BMP/AVI). (Can't use at the same time with
14
Message
"Welcome Message")
Hospitality Logo DL
-
Download the logo file from USB toTV.
Logo Display Time
5 second
Set the logo display time (3/5/7 Seconds).
Clone TV to USB
-
USB Clone: TV → USB
Clone USB to TV
-
USB Clone: USB → TV
When Setting Auto Initialize is set to On, and the
power is turned off and on or the Master Power is
15
Cloning
turned off and on, the data is restored to the cloned
Setting Auto
OFF
values. If there is no cloned value, even when
Intialize
the Setting Auto Initialize is set to On, it will be
ignored and the operation will be the same as that
whenSetting Auto Initialize is set to Off
REACH Server
Standby REACH Server will be operated, according
1hour
update Time
to time setting
REACH Update
Make TV operate REACH Server after 1 minute in
OFF
Immediate
Stand-by mode.
Set the default channel for REACH Server
REACH Server
- None : After Auto Scan, Operate REACH Server
87
Channel
- Channel value : Operate REACH Server at the
channel selected
REACH
16
Server
REACH Server
0000
Display REACH Server version of TV
Version
REACH Server
Provided REACH Server ID for operating SIRCH on
ALL
Group ID
a specific set.
S-LYNK REACH
OFF
Set whether to use REACH function.
S-LYNK REACH
ON
S-LYNK REACH Volume On and Off
Volume
TICKER
OFF
Ticker On and Off
Network Setup
-
Set IP address to establish Internet connection.
17
Network
Hotel ID Setting
-
Set Hotel ID.
Apps Edit
-
Enter the App Download menu
Specifications
Items
Specification
Comment
PAL, NTSC, DTMB(Hong
TV System
Kong), DVB-T/C(Other region)
Speaker out
10W x 2
Phone Jack output
Variable Audio
4W mono 8 ohm SPK
Audio out
BTL Sound output
Digital audio
Optical
out
Component
Y, Pb, Pr, Audio-L/R
PC
D-sub, Audio-L/R
A/V
Audio Video Jack
Input
Compatible with the HDMI
HDMI
Specifications
75 ohm Unbalanced, Din Jack,
Antenna
F Jack
DATA
RJ-12
Data
RJP
RS232
Operating temperature
10°C ~ 40°C (50°F ~ 104°F)
Operating Humidity
10% ~ 80%
non-condensing
Storage Temperature
-20°C ~ 45°C (-4°F ~ 113°F)
Storage Humidity
5% ~ 95%
non-condensing
Design and specifications are subject to change without prior notice.
➣
For the power supply and Power Consumption, refer to the label attached to the product.
➣
2014-03-21
2:58:30
Advertisement
