Component Output; Video Input Setting - JVC 1010MTH-SW-MT Instructions Manual

x.v.Color
Setting
Values
AUTO Outputs x.v.Color information with HDMI
when video images that include x.v.Color
information are played back.
OFF This is applicable when an x.v.Color
compatible monitor is connected.
Memo:
This is applicable when an x.v.Color compatible monitor is
connected.
Deep Color
Setting
Values
AUTO Set to this value when a "Deep Color" device
is connected.
OFF Set to this value when the video image is
distorted, or colors are unnatural.
HDMI RGB OUTPUT RANGE
Setting Values
STANDARD Set to this value for standard uses.
ENHANCED Set to this value when the black and
white parts of the video image are not
distinct.
Memo:
This is available when connected to a DVI device that only
supports RGB input.
HDMI --> DVI COLOR
Setting
Values
AUTO Value is set automatically according to the
monitor.
RGB FIX Use this setting when video images are not
correctly displayed on the monitor.
Memo:
This is available when the "x.v.Color" setting is set to "OFF".
When the "x.v.Color" setting is set to "AUTO", this setting will
be set to "AUTO" automatically.
Change this setting when no video image appears while
connected to a DVI device.
HDMI AUDIO OUTPUT
Setting
Values
OFF Use this setting if you do not want to send
audio output from the HDMI cable.
ON Use this setting to send audio output from
the HDMI cable.
Description
Description
Description
Description
Description
HDMI-CEC
For setting the HDMI-CEC operation from the connected
device.
Setting Values Description
OFF Disables HDMI-CEC.
ON Enables HDMI-CEC.

COMPONENT OUTPUT

For setting the resolution of video output from the
[COMPONENT VIDEO OUT] terminals.
Setting Values Description
480i Sets output to "480i".
480p Sets output to "480p".
720p Sets output to "720p".
1080i Sets output to "1080i".
Memo:
When the resolution is set to "720p", videos are output at
"1080i" other than those recorded at "720p" even though
"720p" is shown on the display.
This unit does not support component output at "1080p". To
output at "1080p", do so via HDMI connection.
If "VIDEO PRIORITY MODE" is set to "HDMI", the unit will
output at "480i" regardless of the current setting.
If "VIDEO PRIORITY MODE" is set to "COMPONENT", or
when a HDMI connection is used, DVD videos will be
output at "480p" even if "720p" or "1080i" has been set.
The aspect ratio of video/S-video output changes according
to the component output setting. As such, there may be
cases where the aspect ratio of the video/S-video output is
different from the predefined setting of the content.

VIDEO INPUT SETTING

Choose a setting according to the video terminal to be
connected when an external analog input terminal is used.
Setting
Values
VIDEO Use this setting when connecting via the
video (BNC) terminal.
S-VIDEO Use this setting when connecting via the
S-video (black) terminal.
Settings Menu
Description
81