Preparation; Connecting A Monitor - JVC 1010MTH-SW-MT Instructions Manual

Connecting a Monitor

To display video images from this unit, connect it to a monitor.
This unit supports connections using "HDMI cable",
"component video cable", "S-video cable", or "video cable".
Memo:
Switch to the appropriate monitor input according to the
type of connection cable used.
For details, refer to the instruction manual of the monitor.
Connecting using a HDMI cable
Connecting using a HDMI cable (sold separately) enables
signals to be maintained in the digital format, and thus
playback of clear video images.
.
Memo:
Videos cannot be displayed on a monitor that does not
support the copyright protection system (HDCP).
Use a High Speed HDMI Cable.
After connecting using a HDMI cable, change the unit
setting to "HDMI CONNECTION".
For more details, refer to " VIDEO PRIORITY MODE " (A
page 80) .
Connecting using a component video cable
Connecting using a component video cable (sold separately)
delivers playback images that are clearer than those by an S-
video cable.
.
Memo:
After connecting a component video cable, change the unit
setting to "COMPONENT OUTPUT".
For more details, refer to "COMPONENT OUTPUT" (A page
81) .
Connecting using an S-video cable
Connecting using an S-video cable (sold separately) delivers
video images that are clearer than those by a video cable.
.
Connecting using a video cable
Connect the output terminal of this unit to the input terminal of
a TV using the supplied video/audio cable.
(Use the supplied BNC adapter)
.
Note:
Connect the S-video/video output of this unit directly to the
TV (or monitor). Connecting this unit to the TV or monitor
via a video deck triggers the copy protection function, and
may cause distortion in the video images during playback.

Preparation

17