1. Manuals
  2. Brands
  3. SportsArt Fitness Manuals
  4. Treadmill
  5. 1250
  6. Owner's manual

SportsArt Fitness 1250 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SAFETY GUIDELINES:
Please read and follow the following safety guidelines:
Before beginning any exercise program, you should consult with your doctor. It is
recommended that you undergo a complete physical examination.
. Read this owner's manual and follow the instructions.
. Assemble and operate the treadmill on a solid, level surface. Keep the area behind
the treadmill clear.
. Never allow children on or near the treadmill. The treadmill running belt will not
stop immediately if any object becomes caught in the belt or rollers.
. Check the treadmill before every use. Make sure all parts are assembled, and all
nuts and bolts are tightened. Do not use the treadmill if the unit is disassembled in
any way.
. Keep hands away from moving parts.
. The weight limit for this treadmill is 275 LBS. (125 KGS).
. Make sure the treadmill has come to a complete stop and the incline display shows
"0' before folding.
. Wear proper workout clothing: Do not wear loose clothing. Do not wear shoes with
leather soles or high heels. Tie back all long hair.
. Don't rock the unit from side to side. Care should be taken when mounting and
dismounting the unit.
. Straddle the machine with your feet on the right and left staging platforms before
starting the running belt.
. Do not place any liquids on any part of the treadmill.
. To prevent shock, keep all electric components, such as the motor, cord, and
switch away from water.
. Do not use any accessories that aren't specifically recommended by the
manufacturer, these might cause injuries or cause the unit to fail.
. Work within your recommended exercise level, do NOT work to exhaustion.
. If you feel any pain or abnormal sensation, STOP YOUR WORKOUT and consult
your physician immediately.
. Turn off the treadmill while adjusting or working near the rear roller.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1250 and is the answer not in the manual?

Questions and answers

Related Manuals for SportsArt Fitness 1250

Summary of Contents for SportsArt Fitness 1250

  • Page 1 SAFETY GUIDELINES: Please read and follow the following safety guidelines: Before beginning any exercise program, you should consult with your doctor. It is recommended that you undergo a complete physical examination. . Read this owner's manual and follow the instructions. .

  • Page 2: Safety Guidelines

    Warning─To reduce the risk of burns, fire, electric shock, or injury to persons: . A treadmill should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. . Close supervision is necessary when this treadmill is used by, on, or near children, invalids, or disabled persons.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1. SAFETY GUIDELINES..................2. INTRODUCTION....................3. ASSEMBLING YOUR TREADMILL Installation Requirements..................List of parts......................Step by step instruction..................Floor level adjustment..................Folding the treadmill..................... Unfolding the treadmill..................4. OPERATING INSTRUCTIONS Safety key......................5. UNDERSTANDING THE ELECTRONIC PACKAGE Key functions......................

  • Page 4: Introduction

    Owner's Manual. Whether you are a first time user of exercise equipment or a seasoned "pro", understanding the correct use of the equipment will enhance your ability to achieve your exercise goals safely and successfully. Below is the drawing of this treadmill. ITEM:1250...
  • Page 5 ITEM:1250L...

  • Page 6: Assembling Your Treadmill Installation Requirements

    ASSEMBLING YOUR TREADMILL: Installation Requirements Read this owner's manual and follow the instruction contained herein. CAUTION: To avoid back strain, and to insure safety to the unit and yourself, we suggest you may need a helper to remove the running deck assembly from box.

  • Page 7: Step By Step Instruction

    Step by step instructions The following steps explain how to assemble your treadmill. Please read every step thoroughly, and follow the directions completely to ensure correct assembly. 1. Fold the treadmill. Then discard the 4 blocks after removing them from both sides (see Fig.1).
  • Page 8 3. Lay the treadmill on its side. Make sure the running belt is position in the tracks of the two BELT ALIGNMENT ROLLERS underside of the machine (see Fig. 2 ). Fig.2 4. Then, place the treadmill on a level, flat surface. 5.
  • Page 9 6. Attach the handlebars or the end of the handrails to their holders, do not tighten the bolts yet (see Fig. 4). Fig.4 7. Making sure that the notchs in the handlebars or handrails fit into the holder channel (see Fig. 5). Fig.5...
  • Page 10 8. Then, secure with screws provided (see Fig. 6). Fig.6 9. If the unit with handrails, attach the bottom of the handrails with handrail clamps to the treadmill frame secure with one bolt on each side (see Fig. 7). Then, tighten the upper handrails bolts securely.
  • Page 11 10. Assemble the water bottle/personal stereo holder to the right front post using the screws provided.(see Fig.8) ITEM:1250 ITEM:1250L Fig.8 IMPORTANT: Before using the treadmill, the left edge of the running belt must be completely in the green portion of the BELT ALIGNMENT GAUGE, located on the left side of the motor shroud.

  • Page 12: Floor Level Adjustment

    Floor level adjustment If the treadmill is not steady on your floor, turn the FLOOR LEVEL ADJUSTMENT on the rear left leg of the treadmill. Use a hex Allen wrench to raise or lower the floor level adjustment to steady your treadmill (see Fig. 10). Fig.10 Your treadmill is assembled and ready to use.

  • Page 13: Folding The Treadmill

    Folding the treadmill 1. Discard the pin before folding the treadmill (see Fig. 11). ITEM:1250 ITEM:1250L Fig.11 2. Lift the end of the treadmill bed to fold into its upright position, locate the locking nut below the running deck, turning the knob clockwise to secure (see Fig. 12).

  • Page 14: Unfolding The Treadmill

    Unfold the treadmill by turning the knob counterclockwise and then pull the knob to release. Put down the treadmill very slowly until the treadmill is steady on the floor (see Fig. 13). ITEM:1250L ITEM:1250 Fig.13 OPERATING INSTRUCTIONS CAUTION: DO NOT STAND ON THE BELT WHEN STARTING.

  • Page 15: Understanding The Electronic Package Key Functions

    Press the Stop/Reset button once again, all display windows information will be cleared. PROGRAM: The 1250 features a total of five (5) professionally designed workout programs. The programs control the elevation, while you control the speed of your workout. During the actual programs, you cannot change the elevation percentage, but you can change the speed of the treadmill.

  • Page 16: What Each Of The Categories Means

    The course profile for each PROGRAM is as follows: What each of the categories means: TIME: The range available in TIME mode is 00:00-99:59 minutes. Use the MODE key to select the time mode. When TIME LED is lit in the display, use the keys to adjust the desired time.

  • Page 17: Running On The Treadmill

    PULSE: The treadmill is equipped a Polar receiver without transmitter. You need purchase a transmitter/Elastic strap to measure your heart rate during your workout. Press the MODE key to the pulse mode, the pulse indicator lit located on the electronics package. Optimal Polar heart rate distance should not exceed 0.6 meter in order to get the best result RUNNING ON THE TREADMILL: Now, you have become familiar with your treadmill's operation and are ready to...

  • Page 18: Guidelines For Exercise

    GUIDELINES FOR EXERCISE How long should I exercise? The duration of your exercise session is dependent on your fitness level. In general, it is recommended that you maintain your heart rate in the training zone for at least 10 minutes to realize an aerobic benefit. As your fitness level increases, you will be able to maintain your heart rate in the training zone for longer periods: usually between 20 and 30 minutes.

  • Page 19: Adjusting The Running Belt

    If the belt edge is in the green area, the belt does not need adjusting. If the right edge is in the red portion, the belt needs adjusting immediately. ITEM:1250 ITEM:1250L Fig.14 The belt is properly aligned at the factory. However, during shipping and handling or by use on an uneven surface, the belt may move off center.
  • Page 20 Failure to realign the belt could result in tearing or fraying of the belt, which is not covered in the warranty. Please follow the adjustment procedure listed below : 1. Turn on the power switch located on the front of machine. Place the SAFETY KEY on the "SAFETY KEY"...
  • Page 21 Periodically monitor the position of the belt to ensure peak performance: When you are using the treadmill, if you feel a pause in the belt with each foot plant the belt is too loose. Stop the machine, check the belt tension, grab the running belt off the deck in the middle (see Fig.15 &...

  • Page 22: Trouble Shooting

    TROUBLE SHOOTING: CAUTION: SHUT OFF UNIT AND DISCONNECT AC CORD BEFORE MAKING ANY REPAIRS OR MODIFICATIONS. "ERR" messages Note: If the electronic display shows "ERR 1, ERR 3, ERR 6 or ERR 7", please turn off the POWER switch on the front of the machine. Allow the unit rest for 5 seconds, then turn on the power switch begin operation again.

  • Page 23: Blank Display

    To remove the fuse, push on the fuse holder and then turn the holder counterclockwise and the fuse holder with fuse will protrude. Remove the damage fuse and insert a new fuse, push the fuse and holder in, turning clockwise to secure it. If the unit still refuse to respond, please contact your dealer for more information.

  • Page 24: Electronics Package And Motor Fuse Failure

    Electronics package and motor fuse failure If you turn on the POWER switch and there is no light, and nothing displays on the electronics package, then the fuse must be replaced. CAUTION: MAKE SURE THE TREADMILL PLUG ALREADY REMOVE FROM OUTLET BEFORE REPLACE THE FUSE.

  • Page 25: Fuse Failure For Incline System

    The fuse holder 0.5 amp for the drive board is located on the frame at the front of the treadmill (see Fig. 18). ITEM:1250 Fig.18...
  • Page 26 ITEM:1250L...
  • Page 27 Wiring Schematic:...
  • Page 28 Your Authorized Distributor...

This manual is also suitable for:

1250l

Table of Contents