Navigation System - Mazda RX-8 Workshop Manual

< Previous Next >
2011 - RX-8 - Body and Accessories
STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [CAR-

NAVIGATION SYSTEM]

NOTE:
All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio
Repair Order Form.
1. Turn ignition switch to ACC or ON position.
2. Turn the audio power to OFF.
3. While pressing the POWER/VOLUME switch, simultaneously press the TUNE/AUDIO switch
and the DISP switch for 1 s or more.
NOTE:
If several DTCs are in the memory, they can be displayed using the UP/DOWN
switch.
4. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top