Installation And Uninstallation; Installation; Figure 1. Selection Of The Program To Be Installed; Figure 2. Language Selection - ABB iPAQ User Manual

2. Installation and uninstallation

2.1 Installation

Insert USB memory device and execute SDInstaller.exe file.
The following screen is showed: select SD-Pocket.

Figure 1. Selection of the program to be installed

WARNING! The PC must be connected to PDA through the serial / USB port.
The installation file is executed on the PC having the requirements as per paragraph: the user is asked to select the
language of the application.

Figure 2. Language selection

Once the procedure is ended, the program is transferred to the PDA through serial / USB connection. Verify that the
program has been properly installed on the PDA.
If replacement of an existing file is requested, choose the most recent between the ones proposed.
ABB
SACE SD-Pocket 1SDH000503R0002 L3104 5/25
ABB SACE