Advertisement
BLOOMBERG BSAT ENROLLMENT
The Bloomberg Keyboard 4 BSAT device has been designed to be used with any finger on the right hand. If you would like to
change your enrolled finger, contact Global Customer support to have your BSAT enrollment reset. At the next login, you will be
prompted to go through the enrollment procedure.
On entering a username and password, the user will
be prompted to enter a finger image.
To enroll using Bloomberg Secure Access
Technology, take the following steps:
» Launch the Bloomberg Professional Service.
» Press the Enter key to bring up the login page.
» Enter your username and password.
» Click 'Accept' to accept the agreement.
» Click the image of the finger you wish to enroll.
» Follow the on screen instructions. It is advisable
to practice swiping your finger, as this will assist
in registration.
» Once satisfied with your finger swiping, click next
to continue.
» To continue registration, follow the on screen
instructions. After completing the registration,
you will be asked to verify your finger scan.
» One of two screens will be displayed after
verification. If the registration fails, press the
'Page Down' key to repeat registration process.
» If you have successfully registered, press the 'Enter'
key to log into the Bloomberg Professional service.
INSTALLATION & REFERENCE GUIDE
//
04
Advertisement
