Table of Contents
Advertisement
BLOOMBERG BSAT ENROLLMENT
Enrolling with Bloomberg Secure Access Technology
The Bloomberg Keyboard BSAT device has been designed to be used with the right thumb. If you are
currently enrolled with another finger we recommend you change the finger enrolled to your right thumb.
Contact Global Customer support to have your BSAT enrollment reset. At the next login, you will be
prompted to go through the enrollment procedure
On entering a username and password, the user will be prompted to enter an image of his or her right
thumb. Refer to Figure 2 for the proper placement of the thumb on the BSAT sensor.
To enroll using Bloomberg Secure Access Technology, take the following steps:
1.
Press the
RED <DFLT>
2.
Click "Accept" to accept the agreement.
3.
Click the image of the thumb to enroll.
4.
Follow the on screen instructions. It is advisable to practice the placement of your thumb, as
this will assist in registration.
5.
Once satisfied with thumb placement, click next to continue.
6.
To continue registration, follow the on screen instructions. After completing the registration, you
will be asked to verify your thumb scan.
7.
One of two screens will be displayed after verification. If the registration fails, press the
<PAGE FWD>
8.
If you have successfully registered for secure access, press the
the BLOOMBERG PROFESSIONAL service.
For 24 hour global customer support call +1 212 318 2000, +44 20 7330 7500, +65 6212 1000,
+81 3 3201 8900 or press the HELP key twice on the BLOOMBERG PROFESSIONAL
key and enter your username and password.
key to repeat registration process.
.
RED <DFLT>
key to log into
®
service.
9
GREEN
Advertisement
Table of Contents
