Cardo Systems SHO-1 Guick Manual

T
his Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your cardo SHO-1. Use it to
look up basic functions and commands while you are on the road without the
user manual.
This Quick Guide can be printed and folded for easy reference while on the
road, or it may be viewed directly on your smartphone or tablet.
| GENERAL FUNCTIONS
1
Power ON / OFF
Press
• ON: 3 BLUE flashes + ascending tone
• OFF: 3 RED flashes + descending tone
Volume
Tap or
Mute / Unmute
Tap and
Battery level
In Standby, press and
indicator
• Blue LED = Full charge
• Purple LED = Half charge
• Red LED = Almost empty
Hear Your Buddy
In Standby, tap
Name
Paired Device
In Standby, press
Indication
If "One+8" Buddies are within range, purple LEDs flash for
2 seconds
Play Paired Buddy List
In Standby, press
Group Signal
Tap twice
Enable / Disable VOX
In Standby, press
(For Intercom calls only)
• Enabled: Blue flash for 2 seconds
• Disabled: Red flash for 2 seconds
Enable / Disable
Press
Spoken Status
Announcements
| VOICE COMMANDS
2
1. In Standby, tap or speak any word loudly to activate VOX
2. Speak a Voice Command from the table below:
Current Mode Desired Action
"One+8" Intercom Call
Standby / FM / A2DP
/ AUX
Intercom call with A or B
Start A2DP
Standby
Turn on FM
Turn off FM
Next Station Preset
FM Radio
Previous Station Preset
Next track
Previous track
A2DP Music
Stop / Pause A2DP
™
for 2 seconds
to adjust and set volume of current audio source
simultaneously
for 5 seconds
and simultaneously
and for 2 seconds
for 2 seconds
and for 2 seconds
and for 2 seconds
Say this:
<<Buddy Name>>
"Call Intercom"
"Music ON"
"Radio ON"
"Radio OFF"
"Next Station"
"Previous Station"
"Next track"
"Previous track"
"Music OFF"
scala rider G9 Unit
Voice Command
• Intercom
• On / Off
| SETTINGS MENU
3
Enter Settings Menu
Exit Settings Menu
| MAIN UNIT LED INDICATION
4
None
1 BLUE flash every 3 seconds
2 BLUE flashes every 3 seconds
1 RED flash every 3 seconds
2 RED flashes every 3 seconds
Solid PURPLE
Solid RED (battery LED)
| VOICE CONNECT (VOX)
5
Adjust via the Settings Menu, the App or the Cardo Community.
VOX Sensitivity
High: Use this setting if it is difficult to activate VOX
(Default: Medium)
Low: Use this setting if it is too easy to activate VOX
VOX Operation
VOX can be set to activate the Voice Command (default) or to
Mode start an Intercom Call via the Cardo Community or the App
| PAIRING BLUETOOTH DEVICES:
6
MOBILE PHONE/GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1
In Standby, press
pairing mode
Bluetooth Channel 2
In Standby, press
pairing mode
To pair a GPS, when LEDs begin rapidly alternating, tap
Volume Up
Volume Down
Music and Mobile
In Standby, press for 2 seconds and follow
the spoken instructions
Press for 2 seconds
cardo SHO-1 is OFF
Standby mode – No active audio
Active mode – Call in progress / music or other
audio source is ON
Standby mode – Battery is low
Active mode – Battery is low
USB connected
Charging
for 5 seconds
for 5 seconds
.