Fujitsu Primergy CX400 S2 Operating Manual page 22

Important information
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
●
instructions on environmental conditions for your device (see
enclosure specification" on page
If the server enclosure has been moved from a cold environment,
●
condensation may form both inside and on the outside of the
machine.
Wait until the server enclosure has acclimatized to room temperature
and is absolutely dry before starting it up. Material damage may be
caused to the server enclosure if this requirement is not met.
Only transport the server enclosure in the original packaging or in
●
packaging that protects it from impacts and jolts.
Installation and operation
V
CAUTION!
This unit should not be operated in ambient temperatures above
●
35 °C.
If the unit is integrated into an installation that draws power from an
●
industrial power supply network with an IEC309 connector, the PSU's
fuse protection must comply with the requirements for non-industrial
power supply networks for type A connectors.
The unit automatically adjusts itself to a mains voltage in a range of
●
100 - 240 V. Ensure that the local mains voltage lies within these
limits.
This device must only be connected to properly grounded power
●
outlets or insulated sockets of the rack's internal power supply with
tested and approved power cords.
Ensure that the device is connected to a properly grounded power
●
outlet close to the device.
22
13).
Operating Manual
"Server
CX400 S2