Advertisement
Connecting the Mini-USB Cable to a Kenwood Unit (DNX series)
1. Attach the cable clamp to the back of the Kenwood unit.
2. Thread the mini-USB cable through the clamp. Close the clamp.
3. Connect the mini-USB cable to the mini-USB port on the back of the Kenwood unit.
DNX Series
Connection
Connect the mini-USB cable (1.5 meters) to the mini-USB port on the Kenwood unit.
Back of Unit
Connecting the Mini-USB Cable to a Kenwood KNA-G610
1. Open the lid cover on the KNA-G610.
2. Connect the mini-USB cable to the mini-USB port.
3. Route the mini-USB cable through the unit as shown in the diagram and close the lid cover.
Connect the mini-USB cable (1.5 meters) to the mini-USB port on the Kenwood unit.
KNA-G610
Connection
Mini-USB port
Lid cover
Connect to
KNA-G61
0
Connecting the Cables
The KNA-NTIOO connects in series between the antenna and Kenwood unit.
1. Connect the antenna plug to the female (receptacle) adapter cable. Connect the Fakra plug to the In connector
on the KNA-NT1 00. The Fakra plug locks firmly in place.
Fakra
connector
KNA-NT100
In
Female
adapter
~~~
Antenna
connector
2. Connect the Fakra connector of the adapter cable to the Out connector of the KNA-NT100. Connect the male
(plug) adapter cable into the Kenwood unit receptacle, as shown below.
Kenwood unit
Male
adapter
EN-2
Fakra
connector
f.1
~~
KNA-NT100
Out
Advertisement
