Installation - Samsung SSA-R1000V User Manual

installation and external connection

INSTALLATION

- Inserted in the doorframe / attached to the wall
1. Two 6-32 or M3 holes are 3.3" (8.38 cm) away from each other vertically; between the two exists one 1/2" hole
through which the reader cables are arranged. The midway hole is located 1.7" (4.31cm) down from the upper
hole.
(If the product is already installed, you can skip this step.)
2. Insert the reader cables to the midway hole and fi x the reader module with two 6-32 or M3 screws.
3. Insert the reader module into the appearance case and tighten the screw (M6x8mm) using the hex wrench.
Upper
6-32 hole
1.7"
(4.31cm)
3.3"
(8.38cm)
1/2"hole
6-32 hole
Lower
Reader
Module
3mm Hex Wrench
Wall Mount
Mullion Mount
6-32 or M3 Screws
Gang Box
SSA-R1000V
Bezel
6-32 or M3 Screws
Reader
Module
SSA-R1000V
Bezel
3mm Hex Wrench
Electric Gang Box Mount
EnglisEnglish _ 9