Sanyo SHA TM64 AGB Instruction Manual page 13

Schedule Timer
STEP 5 Select other copy destination groups if desired.
You can copy the selected source group programs into other
groups by repeatedly pressing the GROUP button to select a
group followed by the SET button to set it.
NOTE
If a group from numbers 1 to 4 was selected as the copy desti-
nation group, that number appears in the program
group from numbers 5 to 8 was selected, that number appears in
the program
STEP 6 Press the PROG. COPY GROUP button to enter the copied
programs in the selected groups.
The normal display returns.
3
NOTE
If a program already exists in the copy destination group, the newly copied program overwrites the existing pro-
gram.
If you accidentally copy over a program in the group program copy mode, holding down the CANCEL button for
more than 2 seconds returns the program to the point prior to pressing the PROG. COPY GROUP button in STEP 1. (All
changes and copy operations made up until that point are cleared.)
area.
.
area. If a