Setup; Power Connection - Sanyo DVP-P1EX Instruction Manual

POWER CONNECTION

Connect the AC adapter
Connect the supplied AC adapter to the printer. Make sure that all the power cord and
AC adapter plugs are firmly inserted.
1
Insert the power cord plug into the AC adapt-
er socket.
2
Connect the other end of the power cord plug
to a power outlet.
3
Insert the AC adapter plug (L type) in the DC
IN terminal of the printer.
Turn on the power
1
Press the POWER button.
h The printer turns on, and the POWER indica-
tor and LCD monitor light.
h If the POWER button is pressed again, the
power turns off, and the POWER indicator and
LCD monitor turn off.
CAUTION
Do not turn off the printer while it is printing.
i If the printer is turned off while it is in the middle of printing, the paper will stop moving
and may cause a paper jam. Turn off the printer only after printing is completed.
Use only the supplied AC adapter
i To prevent damage to your printer, do not use an AC adapter other than the one sup-
plied with the printer.
3
1
Power indicator
LCD monitor

SETUP

2
POWER
button
21
English