Sanyo DVP-P1EX Instruction Manual page 14

CAUTION
k Caution when connecting the AC adapter.
i Securely plug the power cord all the way into the power
outlet. If the power cord is not fully plugged in, heat
may be generated and cause a fire.
i Do not use a bundled power cord, as the heat gener-
ated may cause a fire.
i When using an extension cord, make sure that the total
wattage of the connected devices does not exceed the rated value of the extension
cord. If the power load exceeds the rated value, it may cause a fire. Before using an
extension cord with the printer, make sure to read all its accompanying instructions.
i Do not leave the supplied AC adapter's power cord plugged into the power outlet
while the other end is not plugged into the printer's power socket. The loose end can
cause electrocution if touched with wet hands or if handled by children.
i Use only the supplied power cord. If a different power cord is used, it may be rated for
a different current load, and that may cause a fire.
i The supplied AC adapter is for exclusive use with this printer. Do not use it with other
devices, as doing so may cause a fire or electric shock.
CAUTION
k When unplugging the power cord, be sure to hold the power plug and
slowly pull it out of the power outlet.
i Pulling the cord portion may damage the power cord
and cause a fire or electric shock.
k Do not touch the power cord plug with wet hands, or you risk receiving
an electric shock.
10
English