Toshiba RAV-SM404MUT-E Service Manual page 89

No. Part name
1. Detachment
Electric
2
parts cover
1) Perform work of procedure 1 -1.
2) Take off screws (Ø4 × 10, 3 pcs.) fixing the
3) Remove the electric parts cover from the
2. Attachment
1) Close the electric parts cover and hook the
2) Tighten the fixing screws. (Ø4 × 10, 3 pcs.)
1. Detachment
Adjust
3
corner cover
1) Perform work of procedure of 1 -1.
2) Turn clockwise screws (4 positions) at the
NOTE)
When you work, keep the torque at below 12N•m.
Do not use an electric screwdriver; otherwise the
mechanism of adjust corner cover may be
damaged and not be removed.
3) Pull downward the risen-up part of adjust
4) Remove the strap of adjust corner cover.
2. Attachment
1) Attach the strap of adjust corner cover to
2) Turn screws (4 positions) of the suction
NOTE)
When you work, keep the torque at below 12N•m.
Do not use an electric screwdriver;
otherwise the mechanism of adjust corner cover
may be damaged and not be removed.
Procedure
electric parts cover.
temporary hanging hook of the electric
parts cover, and then open the cover.
cover hole to the temporary hanging hook.
suction port corner until adjust corner
cover rises up.
corner cover and remove it.
the panel, hook claws of adjust corner
cover to the panel corner, and then push
the opposite side into the panel.
port corner counterclockwise until bump
between adjust corner cover and panel
disappears.
Screws
Unnecessary to remove this hook.
– 89 –
Remarks
Temporary hanging hook
Screw
1
2
Torque~12N·m
1
2
3
Torque~12N·m