Presentation Of The Ql Boat Trim System; System Comprises; Control Unit/Panel; Interceptor Unit - Volvo Penta QL Boat trim system User & Installation Instructions Manual

Presentation of the QL Boat Trim System

The system comprises:
A. Control Unit
B. Control Panel
C. Interceptor Units
D. Cable between Control Unit and Interceptor Unit
E. Cable between Control Unit and Control Panel
The system is designed for planing boats, max boat
speed of 50 knots (57 miles/h). The system can also be
used on semi-planing boats, see sizing guide lines.
The Interceptor units are available in two lengths, 300
mm (12") and 450 mm (18"). They can be installed
individually or side by side, i.e. two units on each side of
the transom (300 + 300 (12" + 12"), 300 + 450 (12" + 18")
or 450 + 450 (18" + 18")).
Fig. 1
A
D
C
Control unit (A)
The control unit is the brain of the system, and is
available in two versions, one for 1 pair of Interceptors
and one for 2 pairs of Interceptors. Ambient operating
°
temperature: Min -40 C, Max +85
Length Width
(mm/inch) (mm/inch)
180/7.1 35/1.4
E
D
C
°
C.
Height
(mm/inch)
41/1.6
Fig. 2
35 mm
(1.4")
Control panel (B)
The control panel is equipped with 4 push buttons for
smooth operation of the trim system. For push button
functions, see Operating the system. The panel is also
equipped with two rows of LEDs for exact trim indication.
Length
(mm/inch)
B
83/3.3
* Surface mounted, see fig 20 (A).
Fig. 3
13 mm (0.5")
max. 20 mm
(0.8")
Interceptor unit (C)
Two different sizes are available.
Length
(mm/inch)
300/11.7
450/17.7
** Outside transom.
Each interceptor unit is supplied with necessary
stainless steel screws, for installation in fibre-glass hulls.
Note! Maximum stroke of the Interceptor blade is
35 mm (1.4").
41 mm (1.6")
180 mm (7.1")
Width Height
(mm/inch) (mm/inch)
68/2.7 13/0.5
52 mm (2.1")
52 mm (2.1")
Width Height
(mm/inch) (mm/inch)
100/3.9 42/1.7**
100/3.9 42/1.7**
Hole
cutting
(mm/inch)
52/2.0*
68 mm (2.7")