Sleep Mode; Force Cooling Function; Auto Restart Function; Turbo Mode - Midea MSC-07CRN1 Service Manual

11.10.1 Select forced cooling function with the forced cooling button or the switch
11.10.2 The compressor is unconditionally turned on, after 30 minutes cooling operation whose fan
mode is set as low, the A/C operates at the DRY mode with a set temp. of 24
11.10.3 All protections of remote control cooling are available at forced cooling operation
11.10.4 Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24

11.11 Sleep mode

11.11.1 The sleep function is available at cooling, heating or auto mode
11.11.2 Cooling:
The set temperature rise 1
the fan speed is kept at low speed.
The total time is 7 hours, after 7 hours the unit stops
11.11.3 Heating:
The set temperature decrease 1
constant and the air circulation is kept at low speed (Anti-cold function takes precedence over all).
The total time is 7 hours, after 7 hours the unit stops
11.11.4 Auto:
After an hour running under economic mode, the set temp will rise 1
temp will decrease 1
℃
mode; the condition will be the same after the air conditioner running under economic mode after 2 hours,
and during the next time the set temp do not change. The total time is 7 hours, after 7 hours the unit stops.

11.12 Auto restart function

In case of a sudden power failure, this function automatically sets the unit to previous settings before the
power failure when power returns

11.13 Turbo mode

In cooling mode, when pressing the turbo button on the remote controller, the unit will enter turbo mode with
ultra-high speed and reach the set temperature more quickly. After running 20 minutes in turbo mode, the
indoor fan will automatically recover the preset speed.

11.14 PLASMA ( optional):

Starts with indoor fan.
Note: Plasma and Anion can be use together

11.15 Anion( optional)

Starts with indoor fan.
Note: Plasma and Anion can be use together
37
per hour. Two hours later, the set temperature will maintain as a constant and
℃
℃ per hour. Two hours later, the set temperature will maintain as a
, if it is under heating mode; the set temp will be changeless, if it is under fan-only
Service manual
℃
.
℃
℃ , if it is under cooling mode; the set