2Xx Paper Jam Message Table - Toshiba e-STUDIO 20CP Service Manual

2XX Paper Jam Message Table

Note: A secondary message only displays if the finisher option is installed. Use the
Error Code Table" on page 2-18
2xx Primary
code Message
200 Paper Jam
Clear Paper Path
Go to the "Paper
Path Service Check"
on page 2-105
201 Paper Jam
Clear Paper Path
Go to the "Paper
Path Service Check"
on page 2-105
202 Paper Jam
Clear Paper Path
Go to the "Paper
Path Service Check"
on page 2-105
2-22
Service Manual
5060-XXX
to help diagnose paper jam problems.
Secondary
Message
Leave sheets in
Finisher area 5
Leave sheets in
Finisher area 5
Leave sheets in
Finisher area 5
Description
Primary: Paper is jammed at the printers input
sensor. Open the printers left door to access the
paper jam. If sheets have been accumulated to
be stapled or offset when the jam occurred, the
printer alternately flashes the primary and
secondary messages to indicate that all
accumulated sheets not be removed during the
jam clearing procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
Primary: Paper is jammed at the fuser, open the
right door to access the jam area. If sheets have
been accumulated to be stapled or offset when
the jam occurred, the printer alternately flashes
the primary and secondary messages to indicate
that all accumulated sheets not be removed
during the jam clearing procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
Primary: A paper jam has occurred at the fuser.
Open the right door to access the jam area. If
sheets have been accumulated to be stapled or
offset when the jam is detected, the printer
alternately flashes the primary and secondary
messages to indicate that all accumulated sheets
should not be removed during the jam clearance
procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure. The printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
"Sub