Panasonic KX-NCP500 Manual page 42

4.2.3 Programming the Network Settings
*1 When "En-bloc" is selected, you need to press "#" after dialing the phone number.
42 IP Networking Guide
4. a.
From the system menu, click Private Network.
b.
Click TIE Table.
c.
In the Leading Number box, type the starting digit
of destination extension.
d.
Click OK.
5. a.
From the system menu, click Configuration.
b.
Click Slot.
c.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
d.
Click Ous.
You will see a confirmation message.
e.
Click Yes.
f.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
g.
Click Shelf Property.
6. a.
Click the Outgoing Call tab.
b.
Select the preferred En-bloc Dialing setting
(Overlap (default) or En-bloc
c.
Click OK.
7. a.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
b.
Click INS.
).
*1
Document Version 2009-12