Table of Contents
Advertisement
EdgeMarc 4500 SOHO Router Installation Guide
Rack-Mount Installation
You can mount the EdgeMarc 4500 in a 19" rack by using the rack-mount kit supplied with the
product.
1. Attach the ear mounts to both sides of EdgeMarc 4500 with the screws.
2. Attach the EdgeMarc 4500 with the ear mounts to the shelf by screwing the ear mounts to
the shelf with screws.
Connecting the Power and Cables
The EdgeMarc 4500 comes with an AC power cord and power adapter for connecting the unit
to the AC outlet.
Warning
Always connect the AC power cord to an AC outlet suitable for the power supply that came with
the unit in order to reduce the risk of damage to it.
Connect one end of the AC power cord to the power adapter and the other one to the AC
•
outlet.
Connect plug from the power adapter to the Power Connector on the EdgeMarc 4500.
•
Sometimes a little force is necessary to get the plug properly positioned
Caution
Secure the power adapter using a fastener or tie wrap to nearby shelf so that it does not hang
from the power connector.
If connecting to a WAN router, cable modem or DSL modem, then connect the Ethernet
•
cable to the Ethernet WAN port on EdgeMarc 4500 and the other end to the WAN device.
9
Advertisement
Table of Contents
