Audibleuserfeedback T Ones; Busy Tone; Intercept Tone; Volume Leveltone - Kenwood TK-840 Instruction Manual

AUDIBLEUSERFEEDBACK T ONES
The transceiver outputs various tones to notify the user of the transceiver's
operating status.
.
Busy Tone
The busy tone is similar to a telephone busy tone. The tone is output
when all repeaters in the system are being used. The tone stops when
transmission becomes possible or the PTT switch is released.
.
Intercept T one
The intercept tone is similar to a "high-low" siren. The tone sounds when
the transceiver is out of the system service area and a repeater cannot be
reached. The intercept tone stops when the PTT switch is released.
.
Volume LevelTone
The volume level tone is the same as the busy tone. The tone sounds
each time a VOLUME Up/Down switch is pressed while the transceiver is
in receive mode. The volume of the tone increases and decreases as the
volume is adjusted.
.
Proceed Tone
This tone is a short beep. It is available when the Clear-to-Talk function
has been set for the transceiver. "Clear-to-Talk" simply means the
repeater system is ready to begin handling your telephone call after you
have connected successfully with a repeater.
12