15.88(5/10") 12.70(1/2") Optional / Hanger-plate Optional / Hanger-plate Refrigerant tube kit/Accessories Indoor unit Outdoor unit Indoor unit Outdoor unit Height Unit dimensions Width 1080 Depth Dimensions Height 1122 1540 & Package dimensions Width 1151 Weight Depth Weight Shipping Samsung Electronics...
Page 4
Flare type Flare type Flare type 6.35(1/4") 6.35(1/4") 6.35(1/4") 12.70(1/2") 12.70(1/2") 12.70(1/2") Optional / Hanger-plate Optional / Hanger-plate Optional / Hanger-plate Indoor unit Outdoor unit Indoor unit Outdoor unit Indoor unit Outdoor unit 1080 1080 1080 1151 1151 1151 Samsung Electronics...
If you wish to save energy when using your air conditioner, select the Energy saving mode with the button. Sleep button. The sleep timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours. Samsung Electronics...
Page 7
After setting On Timer or Off Timer, press the button to set it completely. And press the button again to cancel On Timer or Off Timer set. Digital On/Off button. If you want to turn off the display during operation press the button. Samsung Electronics...
Page 8
When the temperature has been dropped function to detect an outdoor overload by by total of 2°C, that temperature is main- the sensor of an indoor heat exchanger tained. and to turn the outdoor fan or the compressor ON/OFF for safety. Samsung Electronics...
Page 9
You can set the period of time from 30 minutes to 24 hours. 11. GENERATING ANION : The air conditioner can generate anion with an ionizer in the indoor unit. Samsung Electronics...
Page 10
It is harmful to the air conditioner if it is used in the following environments: greasy areas (including areas near machines), salty areas such as coast areas, areas where sulfuric gas is present such as hot spring areas. Contact your dealer for advice. Samsung Electronics...
$ When pressing the button appear on the display, select one of them. % When pressing the button appear on the display, select one of them. ^ When pressing the button appear on the display, select one of them. Samsung Electronics...
Page 12
If all lamps of indoor unit are flickering, Plug out and plug in again and pressing ON/OFF key to retry. If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the correct option code is set up for it’s model. Samsung Electronics...
10) In order to disassemble the panel grille, press, in order, the left, center, and right of the upper side of the panel grille with the palm of the hand to remove the hook. And then disassemble the panel grille. Samsung Electronics...
Page 15
2) Loosen 2 fixing earth screws of right side. 3) Separate the connection pipe. 4) Separate the holder pipe at the rear side. 5) Loosen 3 fixing screws of right and left side. 6) Separate the heat exchanger from the indoor unit. Samsung Electronics...
Page 16
Cross Fan 2) Loosen 2 fixing screws and separate the motor holder. 3) Loosen 1 fixing screw of fan motor. (M3 wrench) 4) Separate the fan motor from the fan. 5) Separate the fan from the left holder bearing. Samsung Electronics...
Page 17
1) Do Procedure “1” above. Fan Motor 2) Remove the nut flange. & (Turn to the right to remove as it is a left Propeller Fan turned screw) 3) Disassemble the propeller fan. Samsung Electronics...
4. Exploded Views and Parts List 4-1 Indoor Unit 12-4 12-6 12-1 7-1 7-9 12-3 7-10 12-2 12-5 1-1-2 1-1-3 1-1-4 1-1-1 1-1-5 1-1-6 1-1-7 You can search for the updated part code number through the ITSELF. URL : http://itself.sec.samsung.co.kr Samsung Electronics...