Components And Instrument Panel - Sanyo SHP-TH90GDN-SW Technical Manual

03. Components and Instrument panel

General:
The normal user panel is the Display unit located on the front panel. All settings and values are available from the
display unit. Under the front cover are the thermostats for over temperature protection and reserve temperature
thermostat located. The thermostats no
Upper cover
Demount by pushing the
cover forward and upwards
Display unit
Position of the display unit.
Thermostats
After demount of the front
panel the spare thermostat
is available.
Network cable
Between the display unit
and the electric box. Quick
connection at the display
unit.
Cable supply
Cable intake into the
electric box.
Load circulating pump
Circulates the water
between the tank unit and
the Sanyo heat pump
Shut off valve (circulating
pump)
Must be open when the
heat pump is connected.
Close when circulating
pump needs maintanance
erated.
Screws for the front
cover
After demounting the upper
cover, the screws (2 pcs)
for the front cover can be
accessed.
Demount front cover
After demounting the upper
screws, pull the front panel
against you and then lift it
upwards.
Note: Don t forget to loosen
the network cable contact
on the display unit after
removing the front panel
Tank shut off valves
starting the heat pump
Draining valve
Drains the tank unit and the
radiator system.
et to open before