Advertisement
Device
*1
Parameter
*4
Parameter
Setting Items and Set Data
Setting Items and Set Data
*1
Exception is parameter 37 of FR-E500 series, FR-S500 series, FR-F500J series, and FR-E700 series.
*2
The range, "000 to 993", can be used for the External Device of FR-C500 series, FR-S500 series, and FR-F500J
series.
*3
When you write to the bit address, the Display reads the entire word, sets the defined bit, then returns the new
word value to the External Device. If the ladder program writes data to this word address during the bit write
process, the resulting data may be incorrect.
*4
Parameter 37 of FR-E500 series, FR-S500 series, FR-F500J series, and FR-E700 series.
*5
Specify "P037" (32 bit External Device) for Parameter 37 of FR-E500 series, FR-S500 series, FR-F500J series,
and FR-E700 series. When "037" is used, an unexpected error occurs.
*6
Setting items and set data of the series except for FR-V500/FR-V500L series.
*7
Setting item differs depending on the series. Check for the setting item list before reading or writing a setting
item.
*8
There are some items that are only for reading or writing among the setting items. Refer to the table below
before reading/writing a setting item.
S01 to S04, S06 to S46, S49 to S52
SL01 to SL04, SL06 to SL46, SL49 to SL52
S47 to S48, S53 to S57
SL47 to SL48, SL53 to SL57
S00, S05, S58 to S59
SL00, SL05, SL58 to SL59
*9
Setting items and set data of the FR-E500 series, FR-S500 series, FR-F500J series, FR-E700 series and FR-
V500/FR-V500L.
GP-Pro EX Device/PLC Connection Manual
Bit Address
000.00 - 991.15
000.00 - 993.15
P037.00 - P037.31
*6
S00.00 - S59.15
*9
SL00.00 - SL59.31
Setting Items
This address can be specified as system data area.
Word Address
000 - 991
000 - 993
P037
S00 - S59
SL00 - SL59
Read/Write
Read only
Write only
Read and Write
140
FREQROL Inverter Driver
32bits
Notes
*2 *3
*3 *5
-
*3 *7 *8
*3 *7 *8
-
Advertisement
