Panasonic KX-TDE100 Features Manual page 341

To Receive a TIE Line Call
a.
Extension Number Method (Access without PBX Code)
[Example]
PBX-4
Extn. 1011
PBX-1
Dials "3011".
Note
When a TIE line call is sent from one PBX to another, the receiving PBX first modifies the received
number according to the assignment for the trunk port: the number of digits removed, and the
number added, are determined by this assignment. Then the PBX checks whether the completed
number is an existing extension number at that PBX.
b.
PBX Code Method (Access with PBX Code)
TIE Line Network
PBX-3
1 3011
PBX-2
A TIE line call is sent to
1
PBX-2 from PBX-1. If the
number sent from PBX-1 is
an extension number of
PBX-2 (e.g., 2011), the call
3
will be received at
extension "2011". If not,
Extn. 3011
PBX-2 checks the number
in the TIE Line Routing and
Modified Table of PBX-2.
2 3011
If the match is found in the
2
table, the call will be
modified according to the
table and send to the
Extn. 2011
corresponding PBX
(PBX-3).
The number sent from
3
PBX-2 "3011" is an
extension number of
PBX-3. The call is received
at extension "3011".
1.30.1 TIE Line Service
Feature Guide 341