Connection; Basic Connections - Panasonic DMR-BW880 Operating Instructions Manual

Connection

Basic connections

When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other TV connections (
To household mains socket
(AC 220 to 240 V, 50 Hz)
Connect only after all other
connections are complete.
AC mains
lead
(supplied)
4
AC IN
This unit's rear panel
Required setting:
Set "HDMI Video Mode" and "HDMI Audio Output" to "On" (
(The default setting is "On".)
≥ The HDMI connection supports VIERA Link "HDAVI Control" (
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is
turned off
[approx. 1.1 W ("Power Save in Standby" is activated)]
About HDMI cable
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
≥When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
≥Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
≥ If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (
output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
≥ How to replace the fuse
Open the fuse cover with a screwdriver and replace the fuse, then attach the fuse cover.
12
VQT2X37
14)
Cooling fan
3
64).
To the aerial
1
Aerial cable
RF IN RF IN RF OUT RF OUT
OPTICAL
10BASE-T/
100BASE-TX
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
2
HDMI cable
( below)
VHF/UHF
HDMI IN
RF IN
80).
P R P Y
B
COMPONENT
VIDEO OUT
COAXIAL
R - AUDIO- L VIDEO S VIDEO
RF coaxial cable
(supplied)
TV
105) and