E N G L I S H CORDLESS DRIVER/(PERCUSSION) DRILL DC980, DC981, DC984, DC987, DC988 Congratulations! You have chosen a D WALT power tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users.
MACHINERY DIRECTIVE WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. DC980, DC981, DC984, DC987, DC988 CAUTION: Indicates a potentially hazardous situation which, if not avoided, WALT declares that these products described may result in minor or moderate under “technical data”...
E N G L I S H These products also comply with Directive 2004/108/ an increased risk of electric shock if your body EC. For more information, please contact D WALT is earthed or grounded. at the following address or refer to the back of the Do not expose power tools to rain or wet manual.
E N G L I S H used. Use of dust collection can reduce dust- small metal objects that can make a related hazards. connection from one terminal to another. Shorting the battery terminals together may 4) POWER TOOL USE AND CARE cause burns or a fire.
E N G L I S H – Health hazards caused by breathing dust power supply when there is no battery developed when working in wood. pack in the cavity. Unplug charger before attempting to clean. – Risk of personal injury due to flying particles. •...
Page 11
E N G L I S H Chargers LI-ION BATTERY PACKS ONLY Li-Ion batteries are designed with an Electronic The DE9116 charger accepts 7.2–18 V NiCd and Protection System that will protect the battery against NiMH batteries. overloading, overheating or deep discharge. The DE9135 charger accepts 7.2–18 V NiCd, NiMH The tool will automatically turn off if the Electronic or Li-Ion batteries.
The DC984 operates on 14.4 volt battery packs. However, if the outer seal is broken: The DC980 and DC981 operate on 12 volt battery a. and the battery liquid gets on your skin, packs. immediately wash with soap and water for several minutes.
E N G L I S H 8 Grip Have defective cords replaced immediately. 9 Side handle (DC987, DC988) 10 Battery pack Charge only between 4 °C and 40 °C. 11 Release buttons 12 Charger Discard the battery pack with due care for the environment.
ALWAYS hold securely in indicator (16) on the housing. anticipation of a sudden reaction. DC980, DC981, DC984 DC981, DC984, DC988 Proper hand position requires one hand on the grip The percussion drills can be used in the following (8), with the other hand on top of the body as shown.
E N G L I S H WARNING: Never use solvents or other Screwdriving (fig. A) harsh chemicals for cleaning the non- • Select forward or reverse rotation using the slider (2). metallic parts of the tool. These chemicals • Set the collar (4) to position 1 and begin may weaken the materials used in these screwdriving (low torque).
E N G L I S H You can check the location of your nearest authorised GUARANTEE repair agent by contacting your local D WALT office at the address indicated in this manual. Alternatively, a list of authorised D WALT repair agents and full details WALT is confident of the quality of its of our after-sales service and contacts are available products and offers an outstanding guarantee...
Page 20
Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...