To Originate A Call Using Speed Calling (-Station/Group); To Originate A Call Using Speed Calling - System - NEC DT300 Series User Manual

To Originate a Call Using Speed Calling
(-Station/Group)
Press the Redial button.
Press the desired speed calling number.
LNR[*]/SPD[_ _ ]
4:26 PM TUE 12 FEB 2008
To Originate a Call Using Speed Calling
– System
To program Speed Calling – System key (on
one-touch speed calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The
LCD displays previously stored digits.
Dial the "Speed Calling – System" access code and
the abbreviated call code.
Press Feature again.
SET
4:26 PM TUE 12 FEB 2008
To operate from the Speed Calling – System key
Press the "Speed Calling – System" key.
-X
29
4:26 PM TUE 12 FEB 2008
If the DT Series does not have the "Speed Calling –
System" key, dial the "Speed Calling – System"
access code, then the abbreviated call code.
To operate from the Directory key
Press the Directory key.
Dial the abbreviated call code (maximum of 8 digits).
4:26 PM TUE 12 FEB 2008
XXXX
XXXX