NEC DT300 Series User Manual page 15

number, etc.) to the key (up to 24 digits).
* For the assignment of the keys, confirm to the
Telephony Server Administrator.
Following picture shows LCD indication of Programmable keys.
Appropriate icons are displayed according to the using feature.
These displays cannot be changed by user.
Following pictures shows each LCD indication
when Speed Dial key is set to Programmable key. Following
picture shows the indication of each status.
When Station line/Trunk line are assigned.
No icons are displayed.
* Users can register name on each Speed Dial key. For the
procedures, refer to To Register Name On Speed Dial key.
When any features using feature access code are
assigned.
Icons turn black.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, refer to To
Register Name On Speed Dial key.
(9) Scroll Key
This key is used to turn over the page of 8LD display.
(10)Recall
Press key to finish the call and hear the dial tone.
(11)Feature
Used to activate any features as terminal setup
functions, etc. and to program Speed Dial Keys.
13