OVERVIEW The Digital Room Thermostat Range (PBDIG & PBDIG RF) can provide temperature control for areas of up to 40m Both units are compatible with the Remote (wet room) sensor PB23020 and should be installed 1.2m above floor level and away from any direct heat sources.
1 Battery Access 2 First Time Installation & User Controls Open the two side covers and Insert the 2 AAA Alkaline supplied batteries (or remove the small protection tab if the batteries are already installed in the compartment). The unit will display the main icon screen and software version number.
4 Turning the Thermostat Off PBDIG & PBDIG RF User Menu In order to turn off the thermostat use the navigational arrow Menu No Display Description Default Option ) to move the cursor over the (Off) symbol. The display 00 (Available...
7 Technical Specification Measured Temperature Precision: 0.1°C Environmental Operating Temperature: 0°C - 40°C Shipping and Storage Temperature: -10°C to +50°C Setting Temperature Range Comfort, Reduced: 5°C to 35°C by 0.5°C step Anti freeze/OFF: 7°C Holiday: 0.5°C to 20°C Timer: 5°C to 35°C Regulation Characteristics: Hysteresis of 0.5°C...
Page 7
User Guide PBDIG & PBDIG RF Digital Room Thermostat Polypipe Building Products Broomhouse Lane Edlington Doncaster DN12 1ES Tel: 01709 770 000 Fax: 01709 770 001 2410 London Road Mount Vernon Glasgow G32 8XZ Tel: 0141 778 8822 Fax: 0141 778 2703...
Need help?
Do you have a question about the PBDIG and is the answer not in the manual?
Questions and answers