Status Messages - Sartorius Secura User Manual

Status Messages

88 User Manual for Secura, Quintix, Practum
Status Messages
Messages appear on the display when certain events occur:
– Info messages are displayed for two seconds. The program then returns
automatically to its original state.
– Error messages are displayed until they are acknowledged with a key.
Key Fadeout
To avoid operating errors, only the available functions/keys according to the
weighing situation are shown.
The following buttons are only available in certain situations:
A Only when there is a weight value within the zero setting range.
D Only when there is a weight value larger than zero, i.e., positive.
a Only when a peripheral device is connected and "Print" is not locked.
z
Only when calibration and adjustment functions are available and not
locked.
[ Only when the balance has an electronic level indicator.
v Only when a weight value larger than zero is the value saved in the
memory, if the value can be saved (e.g., value larger than SQmin).
w Only when an application can be started (i.e., only when larger than
zero and "Start" is permitted).
Some models are equipped with an internal self-test that is regularly
E-Check
carried out. This ensures that all metrological thresholds are
maintained.
Error Messages in Applications
"Value is too small!"
"Value is too large!"
"Incorrect licence code"
"Not able to increase
identifier."
"Not able to decrease
identifier."
when an entered value is too low for the parameter.
when an entered value is too high for the parameter.
when password protection is enabled and the code
was entered incorrectly.
when the sample ID could not be assigned a number
in ascending order automatically (as described in the
"Individual Identifiers" chapter).
when the sample ID could not be assigned a number
in descending order automatically (as described in the
"Individual Identifiers" chapter).