Connecting With A Computer (Digital Connection) - Mitsubishi Electric LDT323V User Manual

P-4 Connection procedure (continued)
The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other
device is connected, it automatically displays images properly.
<Factory preset timing>
Frequency
Resolution
Horizontal
1 640 x 480 31.5 kHz
2 800 x 600 37.9 kHz
3 1024 x 768 48.4 kHz
4 1280 x 768 47.8 kHz
5 1360 x 768 47.7 kHz
NOTE:
When a signal other than 1
Images may not be displayed correctly depending on the video card or driver being used.

Connecting with a computer (digital connection)

Digital connection:
• Connection via the RGB1 IN connector (HDMI)
(1) Connect an HDMI cable (commercially available) to the RGB1 IN connector.
(2) Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
• Connection via the RGB2 IN connector (DVI-D)
(1) Connect a DVI-D cable (commercially available) to the RGB2 IN connector.
(2) Select [RGB2] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
When an HDMI cable is connected, select HDMI audio.
(You can select HDMI only when the video input is [RGB1].)
LCD monitor (rear)
Remarks
Vertical
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz Recommend timing
x is input, characters may be blurred and fi gures and objects may be distorted.
Resolution
Horizontal
6 1280 x 1024 64.0 kHz
7 1600 x 1200 75.0 kHz
8 1920 x 1080 67.5 kHz
9 1920 x 1200 74.0 kHz
DVI-D cable
HDMI cable
Audio cable
(ø3.5 mm stereo mini)
English-19
Frequency
Remarks
Vertical
60 Hz
60 Hz
60 Hz
60 Hz CVT Reduced Blanking
Computer
(DVI-D, HDMI)
To DVI-D output
To HDMI output
To Audio output
LCD monitor