DeWalt DCT410-XE Instruction Manual page 10

The button has 2 functions:
Zoom: This is to be used when you need a closer look at
the object (3x zoom).
Delete: When in the folder menu, pictures can be deleted
by using this button.
K. Play: Press the button to go to the folder where photos and videos
are saved.
OR
Press the button to play videos.
L. Camera: Press this button for taking a photo.
M. Record: Press this button to start and stop recording
a video.
N. Main Menu: Press this button to show a list of options for operating
the inspection camera or to exit a screen.
O. Back Arrow: Press this button to navigate backward.
P . OK: Press this button to save changes.
Q. Forward Arrow: Press this button to navigate forward.
R. Power indicator for the handle set: When the green light is on it
indicates that the handle set is on.
S. Reset button
INTENDED USE
The inspection camera is designed to play real-time video while looking into walls
and/or tight spaces. With a micro SD card (sold separately), the tool can then take
photos or record videos for documentation purposes.
Photos are saved in JPG format and videos are saved as AVI. This D
camera is compatible with micro SD memory cards up to 16 gigabytes.
Applications consist of automotive inspection, plumbing inspection, HVAC inspection
or cable routing. Read the entire manual before using this inspection camera.
DO NOT use in presence of flammable liquids or gases. The camera cable extension
is waterproof up to the camera connector. DO NOT USE the handle set under wet
conditions.
The inspection camera is a professional tool. DO NOT let children come into contact
with the tool. Supervision is required when inexperienced operators use this tool.
ASSEMBLY
Screen (Fig. 4)
When the screen is attached to the handle set
with a battery, it will receive a charge from
the battery. Ensure the screen is fully charged
before use.
When the screen is disengaged from the handle
set, a battery icon appears in the upper left
corner. This icon also displays the current
charge of the screen.
To install the screen (E) into the handle set (G),
align the screen with the rails on the handle set
and slide it firmly into the handle until you hear
the lock snap into place.
To remove the screen from the handle set,
firmly slide the screen up from the tool handle.
The screen can be turned on and viewed when
it is not attached to the handle set, allowing
easier maneuverability of the camera.
8
WALT inspection
E
FIG. 4
E
G