Create Localuser; Localuser Accounting - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example

create localuser

Use this command to create a local authentication user.
NAS configuration
create localuser <user-id>[name <user-name>][password
<user-password>]
<user-id>
<user-name>
<user-password>
This command is applied to T240G/T160G/T64G/T40G and ZXR10
3900/3200 only.
This example describes how to create local authentication user 1
named zte and set the password to zte.
ZXR10(config)#nas
ZXR10(config-nas)#create localuser 1 name zte password zte
show localuser
clear localuser

localuser accounting

Use this command to set local authentication user to be accounted.
NAS configuration
localuser <user-id> accounting {enable | disable}
<user-id>
This command is applied to ZXR10 T240G/T160G/T64G/T40G and
ZXR10 3900/3200 only.
This example describes how to enable the accounting function of
local authentication user 1.
ZXR10(config)#nas
ZXR10(config-nas)#localuser 1 accounting enable
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 13 AAA Configuration
Local authentication user identifier, range:
1~1024
Local authentication user name, the length
is: 3~32
Local authentication user password, the
length is: 1~16
Local authentication user identifier, range:
1~1024
149