Debug Ip Tcp Packet; Debug Ip Tcp Transactions - Zte ZXR10 Command Manual

Related
Commands
Purpose
Command Modes
Syntax
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Instructions
terminal monitor

debug ip tcp packet

Use this command to set the debug switches for the source and
destination information of the TCP sent/received packets. No infor-
mation is output once the switch is closed with the no command.
Privileged EXEC

debug ip tcp packet

no debug ip tcp packet
� After a switch is enabled, when TCP receives or sends a packet,
such information as source/destination address of data packet,
port number, sequence number, acknowledgment number, the
size of receiving window and control bit information etc. will
be output.
� The information will be displayed when the user logs into
ZXR10. The information includes TCP sending/receiving of
BGP, and TCP sending/receiving of FTP (not include TELNET).
terminal monitor

debug ip tcp transactions

Use this command to set the debug switches for TCP state transi-
tion information. No information is output once the switch is closed
with the no command.
Privileged EXEC

debug ip tcp transactions

no debug ip tcp transactions
� After the switch is enabled, the TCP special event information,
including the destination IP address, port number and MSS
advertisement of TCP connection established, the time reset-
ting of retransmission timer, retransmission timeout, limited
state-machine transition and releasing of TCP control block in-
formation will be output.
� The information will be displayed when the user logs into
ZXR10. The information includes TCP special information of
BGP, and TCP special information of FTP (not include telnet).
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Debugging
81