Table of Contents
Advertisement
Trigger Out
This sets the trigger out function which communicates information such as the power on status of the
projector to external equipment.
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
• Off
: No voltage is output from the trigger out port.
• Power
: When the projector's power is turned on, a voltage is output from the trigger out
port.
• Anamorphic Wide: If the projector's power is turned on while the aspect mode is set to "Anamorphic
Wide" or "Horiz. Squeeze", a voltage will be output from the trigger out port.
High Altitude Mode
A fan is set at a certain speed of rotation so as to bring down internal temperature.
When using above an altitude of about 1500m, set to "On".
Display
Menu Position
x
Press
w
,
,
y
and
Menu Color
Selects the color for the main configuration menu.
• Color 1: Black
• Color 2: Blue
Messages
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, color mode, aspect and item name when memory settings are retrieved.
• If no image signals are being input or the input signals are not supported.
Display Background
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
Startup Screen
This sets whether the startup screen (the EPSON logo screen which is projected when projection starts) is
displayed (On) or not displayed (Off). If you change the setting, the new setting will take effect after the
power has been turned off and the cool-down period is complete.
Standby Confirmation
This sets whether a confirmation message is displayed (On) or not displayed (Off) when
remote control is pressed.
Input Signal
Video Signal
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
z
to specify the position for the menus to be displayed.
Configuration Menu Functions
M
on the
43
Advertisement
Chapters
Table of Contents
