Related Manuals for Antec Fusion
Summary of Contents for Antec Fusion
- Page 1 Fusion - Life Style Case User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario...
- Page 2 Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures. For more comprehensive instructions on installing your motherboard and peripherals, please refer to the user’s manuals which come with your components and drives.
- Page 3 The Triple Chamber structure Upon opening the top panel, you will find the case is divided into three chambers – the power supply chamber, the motherboard chamber and the HDD chamber. This triple chamber structure isolates the heat and noise from each other resulting in much quieter and cooler operation than a traditional desktop case.
- Page 4 If it does not match this Intel standard, please call Antec customer support at (800) 22ANTEC (North America) or at +31 (0) 10 462-2060 (Europe) to buy a USB adapter. This adapter will allow you to connect the front USB to your motherboard on a pin-by-pin basis.
- Page 5 7. Rear Left Speaker Out Pin: Connect RET-L connector to this pin. The VFD Display/Volume Control Fusion comes with a Vacuum Fluorescent Display (VFD) and a volume control to work with your media center application. 1. Make sure the power supply is off and unplugged before installing any hardware.
- Page 6 Cooling System The 120mm TriCool™ fans The Fusion comes with two 120mm TriCool™ fans preinstalled at the side of the case inside the motherboard chamber. These two fans sit right next to the CPU to cool the hottest CPU on the market. Note: The default setting of the fan is Low.
- Page 7 Fresh cool air will flow through the vents through the hard drives, and then flow into the motherboard chamber and exhaust by the two 120mm TriCool™ fans. Note: do not place the Fusion on a soft surface or over anything that will block the bottom air vents The Upper Air Intake There are vents on the top panel above the PCI expansion slot.
-
Page 8: Customer Support
Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2006 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part without written permission is prohibited. Printed in China. Version 1.0.1 03/02/2006...
Need help?
Do you have a question about the Fusion and is the answer not in the manual?
Questions and answers