Configuring And Calibrating Your Smart Board E70 Interactive Flat Panel With Windows; Configuring Your Touch And Display Settings For The Smart Board E70 - SMART Board Board E70 User Manual

C H A P T E R 4
Troubleshooting your interactive flat panel
Configuring and calibrating your
SMART Board E70 interactive
flat panel with Windows
If your SMART Board E70 interactive flat panel has an inaccurate touch or the touch is not working,
you may need to configure or calibrate it. Follow the instructions below to configure and calibrate your
SMART Board E70 interactive flat panel.
I M P O R T A N T
The SMART Board E70 interactive flat panel is factory calibrated. We recommend that you resolve
touch inaccuracy through configuration prior to calibration.
Configuring your touch and display settings for
the SMART Board E70
If touch is inaccurate:
Ensure that your resolution is set to one of the supported resolutions (below).
l
The following list contains the supported resolutions for you SMART Board E70 interactive flat
panel:
1920x1080 *
1600x1200
1280x1024
1360x768
1280x960
The resolutions marked with an asterisk (*) are recommended.
N O T E
There should be no black bar bars on the top bottom or on either side of the image, the image
should completely fill the screen.
If you have multiple displays for example and laptop connected to your E70, ensure that they are
l
set up correctly (See Setting up multiple
22 smarttech.com/kb/170534
1280x768
1280x720 *
1024x768
800x600
640x480
displays)