Camera Direct Print Function (Usb Direct Print/Pictbridge) - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
1.7.3 Camera Direct Print Function
(USB Direct Print/PictBridge)
Printing operations (selecting images to be printed, making print settings, starting/
canceling printing, and monitoring print process) can be carried out from a directly
connected DSC (Digital Still Camera) that conforms to the standard described below.
1.7.3.1 Available DSC
Table 1-35. Available DSC
USB Direct Print
DSCs conform to CIPA DC-001-2003 Digital Photo
DSCs conform to USB Direct Print
Solutions for Imaging Devices (DPS version 1.0) or
Protocol Revision 1.0.
the Rev. 2.0.
1.7.3.2 Print Settings Available from DSC
The following print settings can be made from the DSC. However, depending on the
DSC, some of the settings may not be available.
Table 1-36. Print Settings Available from DSC
Item USB Direct Print
How to specify images Single Sheet / DPOF specified
Paper type Plain Paper/ Glossy Photo / Prem.
(this cannot be specified for Glossy / Matte
CX7300/TX200 series)
Paper size
Layout Borderless
With Borders
(2-up, 4-up, 8-up are available
when specified by DPOF)
Date
Quality
Auto Correct
Fit to Frame Available only for a single sheet
Print Image Framer
Control of printer The following operations are available; Getting the printer status, starting
a print job or canceling it immediately or after printing the current page is
finished. (In the case of the USB Direct Print, resetting the printer is also
available.)
PRODUCT DESCRIPTION
PictBridge
PictBridge
Single Sheet / Multiple Sheet /
DPOF specified
Plain Paper/ Prem. Glossy
4x6, 5x7, Letter (EAI model only), A4
(CX7300/TX200 series for Euro: 4x6, A4)
(CX7300/TX200 series for EAI: 4x6, Letter)
Borderless
With Borders
(cannot be specified for CX7300/
TX200 series)
On / Off
Not available
Not available
Available
Yes / No Not available
Specification for Each Function
1.7.3.3 General Operation Procedure
Before connecting the DSC, check that the printer is in the
C H E C K
P O I N T following status.
• No print job from a computer is processed or performed.
• Direct print from a memory card is not processed or performed.
• Stand alone copy using the scanner function is not operating.
• No paper out error or ink out error is occurring.
The DSC direct print procedure differs depending on the DSC specifications.The
following explains common procedure.
1. Setting on the printer
Before connecting a DSC with a USB cable, make the print settings such as paper
type/size, layout setting on the printer. This may not be required for some DSCs.
2. Setting on the DSC
Make the following settings on the DSC before connecting it to the printer. Some
DSCs may require to first connect to the printer for making the settings.
• When printing multiple images, specify images and number of copies using
the DPOF and Multiple Sheet* menus. The menus may not be available on
some DSCs.
Note*: The Multiple Sheet setting is available when using PictBridge.
• When printing a single image
<USB Direct Print>
Use the Single Sheet menu to specify an image and the number of copies.
The menu may not be available on some DSCs.
<PictBridge>
Specify an image and the number of copies. Specifying the number of
copies may not be available on some DSCs.
• Select the paper type/size, layout, and make the Fit to Frame setting if
necessary. These settings may not be available on some DSCs.
3. Starting to print
When the print settings on both the printer and the DSC is completed, follow the
procedure below to start printing.
1. Connect the printer and the DSC with a USB cable. Using a USB cable
included in the DSC package is recommended.
2. Operate the DSC to start printing.
3. Printing is carried out according to the settings made on the DSC. When some
print settings have not been made on the DSC, the corresponding settings
made on the printer are applied.
36
Confidential