Block Description - Samsung S3FM02G User Manual

S3FM02G_USER'S GUIDE_REV 1.00

2.2.6.2 Block Description

1. U7: EEPROM - SSP8(8Kbytes x 8-bit)
2. U8: EEPROM - SSP16(4Kbytes x 16-bit)
3. J47: Jumper Setting
4. 48,J49,J51,J52: Jumper Setting
J52: U8 [Serial data output] pin
5. J50,J53: Jumper Setting
6. J54: SSP Signal spare ports

1-2 closed: Connect P0.8[ FSS 0 ] to U7[ EEPROM ] chip select pin

3-4 closed: Connect P0.9[ CLK 0 ] to U7[ EEPROM ] SSP clock pin

5-6 closed: Connect P0.11[ MOSI 0 ] to U7[ EEPROM ] serial input pin

7-8 closed: Connect P0.10[ MISO0 ] to U7[ EEPROM ] serial output pin
J48: U8 [chip select] pin

1-2 closed: P1.7 / SSPFSS 0

2-3 closed: P1.3 / SSPFSS 1
J49: U8 [SSP clock] pin

1-2 closed: P1.6 / SSPCLK 0

2-3 closed: P1.2 / SSPCLK 1
J51: U8 [Serial data input] pin

1-2 closed: P1.4 / SSPMOSI 0

2-3 closed: P1.0 / SSPMOSI 1

1-2 closed: P1.5 / SSPMISO 0

2-3 closed: P1.1 / SSPMISO 1

J50 closed: U8 RDY/nBUSY pin port control [ P1.14 ]

J53 closed: U8 RESET pin port control [ P1.8 ]
2-12
2 EVB DESCRIPTION