Table of Contents
Advertisement
26 Key lock display (Page 44)
Displayed when the operation buttons are
disabled.
• When the remote control (optional) is
connected to the REMOTE jack of the
portable recorder, recording and zoom
operations with the remote control are
available even during key lock.
27 Repeat playback display
(In PB mode: Page 61)
Displayed when [REPEAT PLAY] → [ON] in the
[PLAY SETUP] setup menu is selected.
28 Operation status display
In REC mode
REC:
PAUSE (green): Recording standby
PAUSE (red):
REPEAT REC
• Displayed from when recording ends
after approximately 90 minutes until
recording of the next clip starts.
Other than REPEAT REC (During SDI mode only)
• Displayed when an error occurs in
the input signal during recording.
• When the input signal returns to
normal, the recording restarts.
• When the [REC/PAUSE] button is
pressed, the display changes to
green.
CHK: REC CHECK in progress
In PB mode
:
Playback
:
Playback paused
INDEX [
]: Playback paused at index
position
(
): Frame-by-frame playback
(Frame-by-frame reverse
playback)
(
):
Next clip (Previous clip)
(
):
Fast forward playback
(Approximately 5 times the
speed ∗ )(Rewind playback
(Approximately 5 times the
speed ∗ ))
∗ Approximately 6 times normal speed when
the [PB FORMAT] is set to 720/24P.
Recording
Recording paused
(
): Fast forward playback
(Approximately 15 times the
speed ∗ )
(Rewind playback
(Approximately 15 times the
speed ∗ ))
∗ Approximately 20 times normal speed
when the [PB FORMAT] is set to 720/24P.
( ):
Paused in final scene
(paused in initial scene)
29 Input signal display
SDI:
Displayed when in SDI mode.
• The display flashes when recording cannot
be performed, such as when the input signal
and recording format are different.
CAM: Displayed when in CAM mode.
• Flashes if the camera head has an abnormality,
such as a malfunction or broken cable.
INT:
Displayed when [INT SG] → [ON] in the
[RECORDING SETUP] setup menu is
selected. (Page 87)
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
30 Recording function display
P-: Displayed when PRE REC is set.
(In CAM mode: Page 49)
A-: Displayed when [AUTO REC] in the
[RECORDING SETUP] setup menu is set to
something other than [OFF]. (In SDI mode:
Page 86)
R-: Displayed when the REPEAT REC function
is selected.
(CAM/SDI mode: Page 46)
31 Audio output adjustment level display
(Page 68)/Microphone input adjustment
level display (Page 45)
When the [AUDIO MON/ADV] button is
pressed, the sound volume output from
the built-in speaker and headphone jack is
displayed.
During input audio level adjustment, "I.MIC" or
"E.MIC" is displayed instead of "VOLUME".
75
Advertisement
Table of Contents
