Sony IPELA PCS-G70 Operating Instructions Manual page 78

1 Enter the IP address of the remote
party.
Enter the host name and domain
name when using the DNS server
(ex. host.domain). When using the
gatekeeper, enter the user name and
user number registered in the LAN
Setup menu (page 66).
2 Select the LAN bandwidth to be
used.
When "ISDN" or "ISDN
(Telephone)" is selected in step 4
1 Enter the telephone number of the
remote party in the telephone
number text box beside "A".
When entering a sub-address,
enter an asterisk (*) between the
telephone number and sub-
address. Only numbers are usable
for a sub-address.
When "More Options Enable" is
set to "On" in the Dial Setup menu
( ), the A1, A2, B1, B2, C1
page 50
and C2 text boxes appear. Enter
the number of the remote party in
the A1 text box.
2 Select the number of the ISDN
channels to be used for dialing.
78
Registering a Remote Party – Phone Book
6
Select the icon or a still image stored
on a "Memory Stick" to be registered
in the Phone Book.
B b
Press the or button to select the icon
or a still image, then press the PUSH
ENTER button.
Note
You cannot select a still image unless a
"Memory Stick" in which the still image is
stored is inserted.
7
Use the V, v, B or b button to select
"Save", then press the PUSH ENTER
button.
The settings are registered in the Phone
Book.
Note
When a videoconference with a remote
party not registered in the Phone Book is
terminated, you can register this remote
party to the Phone Book. In this case, the
IP address or line number is used as the
name of the remote party. Modify it if
necessary.
To connect to the remote party
without using bonding
If the videoconferencing system of the
remote party is not equipped with the
bonding function, entering one telephone
number does not allow you to connect all the
line numbers used to connect to the remote
party. To connect to the remote party by
entering all the ISDN line numbers used,
you can set the connection without using the
bonding function of this system.
Set "More Options Enable" to "On" in the
Dial Setup menu (page 50), select the More
Options button at the lower part of the List
Edit menu to open the Dial Setup menu, then
set "Bonding" to "Auto". The A1, A2, B1,