Technical Charateristics; Safety; Emc (Electromagnetic Compatibility); Factory Special Mode - Sanyo CE29FFV2-F Service Manual

5. TECHNICAL CHARATERISTICS.

Cathode-ray tubes
Tuning-system
Reception channels
Reception system
Colour system
Program selection
Audio
Speakers
Aerial
Jack for headphones
Clock and alarm Function
Timer Function
AV connectors
Power supply
Consumption
Stereo/Dual Systems
Sound Effects
Auto volume
Clock function
Alarm function
Timer function
TXT
Hotel Mode
Remore ON/OFF
Options by means of Technical Service:
NTSC-M

6. Safety

It fulfils the safety requirements established in the regulation:
EN 60065:98

7. EMC (Electromagnetic Compatibility)

It fulfils the EMC requirements established in the regulation:
EN 55013:2001
EN 55020:1994/A11:1996/A13:1999/A14:1999
EN 61000-3-2:1995+A1:19998+A2:98/A14:2000
EN 61000-3-3:1995

8. Factory special mode

The factory mode is a special TV working mode intended to help in the manufacturing process and it is identified
on the screen with the message "FAC". This mode is never suited for customer use.
The main differences respect to normal mode are:
1- The standby mode is always disabled.
2- The Blue-back (no sync. signal present) is disabled.
3- The customer adjustments ( volume, contrast ...) work faster.
4- The timer off works but it does not change to Stand-by mode.
5- Change of programs and TV/AV swithing faster. Cancelled mute.
In case of finding the TV set in Factory mode, it must be taken out of this state. To do so, enter the clock setting
menu on the customer OSD and then exit.
In-Line, gun Type. Black Matrix. 29" (68 cm) True Flat, Invar Plus mask.
Voltage synthesis, 100 programs in non-volatile memory, AFT, automatic,
semiautomatic and manual channel-search.
Band I, channels 2-4 (VHF)=E2-E4
Cable channels S1-S10
Hyperband channels S21-S41
Band III, channels 5-12 (VHF)=E5-E12
Band IV-V, channels 21-69 (UHF)=E21-E69
B/G, D/K, I, L, L' system
PAL, SECAM, (NTSC 4.43, NTSC 3,58) ONLY AV
Sequential selection from the controls on the set. Direct selection to any program
from the remote-control device.
Power-rating 2x8,9 W rms. (10% distortion)
Ω
2 of 8 .
External aerial sockets 75 Ωs. IEC
Stereo jack 3,5mm. (with independent control)
Switch on and off of CTV programmable in real time.
1 Scart connector 21 pin CENELEC standard AV, RGB and S_Video.
1 Scart connector 21 pin CENELEC standard AV, RGB
1 RCA Video input (frontal)
2 RCA Audio input (frontal)
220 – 240 VAC 50Hz
83 W (IEC 107-1)
2,9 W (Stand-by )
NICAM and Stereo/Dual (A2)
Pseudo Stereo. Bass boost. Actv. 3D sorround, BBE, spatial stereo
Programmable over 24 hours
Switch on and off are programmable aver 24 hours.
1,5 Flot and list. 10 Teletext pages memory
It can be programmed in Hotel Mode and Rental Hotel Mode
Tis TV can be switched ON/OFF Through the blue scart connector.
2
Service Manual SM CE29FFV2-F