Nokia 6710 Navigator Service Manual page 16

25) Before the A-COVER can be separated make sure
that the CAPACITIVE FLEX is detached from the A-
COVER.
27) Protect the LCD with protective film.
29) Turn the UI BOARD ASSEMBLY as shown to gain
acces to the LCD connector.
16
26) Remove the SLIDE ASSY in the direction shown.
Be careful with the hooks on the bottom side of the
A-COVER.
28) Use the dental tool to open the four clips
holding the UI BOARD ASSEMBLY.
30) Use the SS-93 to unlock the locking mechanism
of the LCD connector. While opening the connector,
be careful to not to damage the connector!
Confidential  Copyright © 2009 NOKIA  All rights reserved
Nokia 6710 Navigator RM-491
Service Manual Level 1&2
Version 1.0 ISSUE 1