Network Easy Setting - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Network Easy Setting

After completing "Easy Setting", you can continue with
"Network Easy Setting".
Select "Wired" or "Wireless", then press
[OK].
Network Easy Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Select "Wireless".
Wired
Wireless
OK
RETURN
"Wired" connection
Follow the on-screen instructions and make
the following settings.
≥Network Easy Setting ( Home Network Connection
Check )
≥Home Network ( DLNA ) Server function
≥Network Easy Setting ( Internet Connection Test )
Network Easy Setting
Network Easy Setting have been finished.
Press OK.
OK
RETURN
This screen appears, Setup is complete.
Press [OK].
When you experience problems with settings (
"Wireless" connection
≥Before beginning wireless connection setup
≥Obtain your Network name (SSID
≥If your wireless connection is encrypted please be sure
that you know your encryption key.
Select "Search for wireless network" or
"WPS (PUSH button)" and then follow the
on-screen instructions and make the
settings.
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
OK
RETURN
∫ Search for wireless network:
≥When you select "Search for wireless network", the
available wireless networks will be displayed. Select your
network name and press [OK].
– If your Network name is not displayed search again by
pressing the "Red" button on the remote control.
– Stealth SSID will not be displayed when you select
"Search for Network". Enter Manually by using "Wireless
Settings". ( 82)
≥If your wireless network is encrypted, Encryption Key Input
Screen will be displayed.
Input the encryption key of your network.
∫ WPS (PUSH button):
If your Wireless router supports WPS
(PUSH button), you can easily
perform the settings by pressing
WPS button on it.
22)
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings
relating to the connection and
security of wireless LAN devices.
1 Press WPS button or
corresponding button of Wireless
router until the lamp starts flashing.
≥For details, refer to the operating instruction of Wireless
router.
2 Press [OK].
An SSID (Service Set IDentification) is a name used by
§1
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Wi-Fi Protected Setup-compatible Wireless router may
§2
have the mark.
).
§1
e.g.,
2
21
VQT3C84