Operating Instructions Blu-ray Disc™ Player / HDD Recorder DMR-PWT635 Model No. DMR-PWT530 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. • This Blu-ray Disc Player / HDD Recorder is for viewing and recording free to view channels only.
Safety precautions WARNING CAUTION Unit Unit • To reduce the risk of fire, electric shock or • This unit utilizes a laser. Use of controls or product damage, adjustments or performance of procedures other - Do not expose this unit to rain, moisture, than those specified herein may result in dripping or splashing.
- Do not recharge alkaline or manganese Indemnity concerning recorded content batteries. Panasonic does not accept any responsibility for - Do not use batteries if the covering has been damages directly or indirectly due to any type of peeled off.
Getting started HDD and media information Getting started Recordable/playable contents (–: Impossible) Recordable Media type Standard symbol Playable contents contents • Video • AVCHD/AVCHD 3D Built-in hard disk drive • JPEG [HDD] (HDD) • MPO (3D photo) • MP3 • Video §1 •...
Page 7
• MP3 It cannot be recorded directly. (Only compatible with copying from the built-in HDD) §1 Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be §2 able to play back depending on the device. It cannot be played back directly from the USB HDD or USB memory. Playback is possible by §3...
Page 8
Getting started HDD and media information Playable contents on a DLNA server When this unit works as a DLNA client ( 57), following contents are playable. • MP4 • MPEG2 • Recorded video • AVCHD § § • JPEG • MPO (3D photo) •...
Getting started Notes Notes for an External HDD (USB HDD) You can use an external HDD in the following two ways. (A single HDD cannot handle those two ways simultaneously.) • For recorded titles Moving titles in the built-in HDD to a USB HDD to save the capacity of the built-in HDD. •...
Page 10
Getting started HDD and media information Notes for the SD cards Media handling • Compatible SD card • Do not touch the recorded surface of the discs or the terminal surface of the SD cards. - SD Memory Card (from 8 MB to 2 GB, FAT12 and FAT16 DO NOT formats) - SDHC Memory Card...
Getting started Unit care HDD/USB HDD handling care When moving the unit • The HDD is a high precision device Before moving the unit, ensure the disc tray is empty. The HDD is a high precision recording instrument and is easily susceptible to damage. 1 Switch the unit to standby mode.
Getting started Control reference guide Instructions for operations are generally described using the remote control. Remote control 9 Show DIRECT NAVIGATOR, Top Menu, Pop-up Menu ( 33, 39) : Show OPTION menu ( 42, 48, 53) ; Colour buttons (Use in accordance with ...
Page 13
Getting started Display Main unit Pull to flip down the front panel. 6 Recording indicator • The indicator will light up while recording. 1 Standby/on switch (Í/I) • The indicator will blink while recording is Press to switch the unit from on to standby paused and before recording starts.
If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI Cables 5.0 meters or less. VQT4L31...
Getting started When the unit is not to be used for a long Amplifier/receiver connections time HDMI terminal To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when the unit is in 3D programmes can be played back when standby mode.
Page 16
Getting started Connection ∫ Amplifier/receiver not compatible with 3D DIGITAL AUDIO OUT terminal 3D programmes can be played back when this unit is connected to a 3D compatible Amplifier/receiver OPTICAL IN • This connection only supports up to 5.1ch. Optical digital audio cable Amplifier/receiver HDMI IN (ARC compatible)
You must be aware of these limits before using this unit. Internet Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of •...
While pressing [TV Í], enter the code with the number buttons. TV operation buttons Manufacturer and Code No. DRIVE INPUT SELECT right) PAGE Brand Code Brand Code Panasonic 01/02/03/04 NOBLEX AIWA NOKIA 25/26/27/60/61 AKAI 27/30 INTERNET NORDMENDE BEKO 05/71/72/73/74 RADIO/ BENQ 58/59...
Getting started Easy Setting Set “Quick Start” to “On”, “Off” or “Timer Setting for Quick Start”, then press [OK]. Turn on the TV, then select the appropriate AV input to suit the connections to this unit. Quick Start Timer Setting for Quick Start 6:00 AM 11:00 PM Press [Í] on the remote control or [Í/I] on...
Getting started Settings If the TV aspect setting screen appeares: Easy Network Setting Select the item to match the type of TV After completing “Easy Setting”, you can continue connected. with “Easy Network Setting”. For details, refer to “TV Aspect”. ( Select “Wired”...
Page 21
Getting started Connection method to wireless access point When you experience problems Refer to “When you experience problems with Search for wireless network: Easy Network Setting”. ( 1 Select “Search for wireless network”, then press [OK]. To restart Easy Network Setting 2 The available wireless networks will be displayed.
Getting started FUNCTION MENU screen You can easily access the desired functions, such FUNCTION MENU list as playback, timer recording, the unit’s settings etc. via the FUNCTION MENU. FUNCTION MENU Playback Contents Press [FUNCTION MENU]. Video ( FUNCTION MENU Video (AVCHD) ( Playback Contents Video (MP4) ( TV Guide...
Watching broadcasts Watching broadcasts Watching broadcasts Using Channel List Instructions for operations are generally described using the remote control. ( You can select from the list of channel names. Press [CH W X] to select the channel. Press [OK]. • You can also select the channel by the All Digital Channels following operations - Using number buttons.
Watching broadcasts Watching broadcasts Using TV Guide system Using channel information While watching a programme Press [GUIDE]. Press [STATUS TV Guide screen appears. Remain 71:20 TV Guide TUE 01.01.2013 8:05 AM Category: All Digital Channels 8:00 AM - 9:45 AM TUE 01.01 8:00 AM 8:30...
Watching broadcasts Operations while watching broadcast REWIND LIVE TV/PAUSE LIVE TV This unit temporarily saves a live TV programme To show subtitle you are watching with this unit’s tuner on HDD. When “ ” appears in channel information REWIND LIVE TV You can rewind live TV programme to the point Press [STTL where temporary save has started (up to...
Page 26
Watching broadcasts Watching broadcasts Display information To stop REWIND LIVE TV or PAUSE LIVE TV 1 Press [STOP ∫]. While pausing or rewinding a broadcast: 2 Select “Yes”, then press [OK]. Press [STATUS Pause To hide the display information 8:05 AM 9:35 AM 8:50 AM Press [EXIT...
Recording Recording TV programmes Recording To set the recording time The titles can only be recorded to built-in 1 Select “Recording Time” or “Continuous HDD and cannot be copied from built-in HDD recording” in step 3 ( left). to the media other than USB HDD. Recording Time: You can set the length of recording time from 30 minutes to 4 hours.
Recording Recording TV programmes Operation during Recording To pause recording After displaying the recording programme, press To check the recording programme [PAUSE ;]. • Press again to restart recording. Press [STATUS (A title is not split into separate titles.) e.g., While recording two programmes simultaneously •...
Recording Timer recording To cancel a timer recording on the TV Guide screen 1 Select the programme to cancel, then press • This operation will only record to built-in HDD. the red button. • This unit can record two programmes being 2 Select “Timer Rec Cancel”, then press [OK].
PC, etc. away from home. (You must register to a service to use this function.) For details, please check the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) • However, as of February 2013, the service has not yet been launched.
Recording Timer recording To confirm and edit a timer Screen icons programme Red: Timer recording standby is activated. Press [PROG/CHECK]. Grey: Timer recording standby is deactivated. e.g., Currently recording programme Timer Recording Remain 30:30 TUE 01.01.2013 8:05 AM Space Channel Name Schedule A part or all of the programme will not be TUE 08.01...
Playing back video Playing titles on the HDD Playing back video DIRECT NAVIGATOR (VIDEO) § screen “For recorded titles” only § Screen icons Press [DRIVE SELECT] to select “HDD”, then press [DIRECT NAVIGATOR]. Currently recording programme • If the DIRECT NAVIGATOR screen of Protected title photo or music is displayed, press the red Title was not recorded due to...
Page 34
Playing back video Playing titles on the HDD Switching the appearance Titles will be categorised automatically. 1 Press [OPTION]. You can quickly find the recorded titles by 2 Select “Grouped Titles” or “All Titles”, then selecting the tab. press [OK]. Grouped Titles: To select the tab Two or more titles recorded in the daily/weekly...
Page 35
Playing back video Editing the grouped titles Playback from Chapter View 1 Select the title or the group, then press the Regarding chapters yellow button. You can divide a title into multiple chapters. Each • A check mark is displayed. Repeat this step. section between the division points (Chapter •...
Playing back video Playing titles on the media Menu screen § Selecting screen for each operation is displayed when the media is inserted, and you can access the operation screen easily. e.g., [USB] “For data files” only § Insert the media. Play Video View Photos Depending on the type of the media, play...
Playing back video DIRECT NAVIGATOR screen Notes for BD-Live discs e.g., [BD-V] BD-Live allows you to enjoy more functions such DIRECT NAVIGATOR All Titles VIDEO BD-RE as subtitles, exclusive images and online games Channel Date Title Name by connecting this unit to the Internet. 29.10 Start Time 10:46 AM Rec time 0:10(HM) 04.10...
Playing back video Operation during play Quick View [HDD] [USB_HDD] (For recorded titles) [SD] Press and hold [PLAY/a1.3 1]. • Press again to return to normal speed. • Depending on the media and the type of file, some Search operations may not be possible. •...
Playing back video Frame-by-frame Skipping the title or chapter While paused, press [2] (2;) or [1] (;1). Press [SKIP :] or [SKIP 9]. • Each press shows the next frame. • Press and hold to change in succession forward • [HDD] [USB_HDD] (For recorded titles): It will not skip the or backward.
Playing back video Operation during play 3D Picture Mode 3D video playback Normal Preparation Normal 3D effects. Connect 3D compatible TV to this unit. ( Soft • Perform the necessary preparations for the TV. Soft 3D effects. Play back following the instructions displayed •...
Editing video Deleting recorded titles Editing video Once deleted, recorded content cannot be Deleting during play restored to its original state. Make certain 1 Press [DEL] while playing. before proceeding. 2 Select “Delete”, then press [OK]. § “For recorded titles” only §...
Editing video Editing recorded titles Once deleted, divided or partially deleted, Deleting recorded content cannot be restored to its 1 Select “Delete Title”, then press [OK]. original state. Make certain before proceeding. 2 Select “Delete”, then press [OK]. § “For recorded titles” only §...
Page 43
Editing video Partial deleting Changing thumbnail 1 Select “Partial Delete” in “Edit”, then press 1 Select “Change Thumbnail” in “Edit”, then [OK]. press [OK]. 2 Press [OK] at the start point and end point to 2 Press [OK] at the point to use as a thumbnail. delete.
Editing video Editing recorded titles Editing chapters 1 Select “Chapter View”, then press [OK]. 2 Perform the editing operations. Edit Chapter Mark: Select the point where you want to start a new chapter while viewing the title. 1 Press the green button. 2 Press [OK] at the point you want to divide.
Copying video Copying titles Copying video §1, 2 Set other settings, then press [OK]. e.g., “For recorded titles” only §1 The title in the source media will be deleted. §2 Automatic Standby after Copy Standby status can be changed if required. Connect the USB HDD.
Photo Playing photos Photo To exit the Calendar screen §1 §2 §3 Press [PAUSE ;]. • When there are many files and/or folders, some files may not be displayed or not be playable. ( “For data files” only (JPEG, MPO) §1 DIRECT NAVIGATOR (PHOTO) [BD-RE] only...
Photo Switching to the VIDEO or MUSIC screens Slideshow settings [HDD]: On the DIRECT NAVIGATOR screen: 1 On the DIRECT NAVIGATOR screen: Press the red button. Press the green button. 2 Select “VIDEO” or “MUSIC”, then press [OK]. Slideshow Start Slideshow [BD-RE]: Interval Normal...
Photo Editing photos Select the item, then press [OK]. Edit • Add to Album On the DIRECT NAVIGATOR screen: [HDD] 1 Select the destination album, then press e.g., [HDD] [OK]. DIRECT NAVIGATOR PHOTO 2 Press [OK]. Album 1 Album 2 Album 3 Album 4 Date &...
Photo Copying photos § To stop copying Press and hold [RETURN ] for 3 seconds. “For data files” only (JPEG, MPO) § Selecting and copying the photos • The name of the copied photos will be changed. • If the number of files/folders to be copied exceeds the >...
Music Playing music Music Copying music (MP3) to HDD §1 §2 [USB_HDD] [USB] > [HDD] “For data files” only (MP3) After performing steps 1–2 ( left) §1 [DVD-R] only §2 Press the blue button. Select “Copy”, then press [OK]. Music CD: Insert the disc.
Music Playing music recorded on HDD Playlists [HDD] 1 Select the playlist, then press [OK]. Press [FUNCTION MENU]. 2 Select the track, then press [OK]. Select “Music” in “Playback Contents”, then Frequently Played press [OK]. Tracks most often played recently (up to DIRECT NAVIGATOR Music Menu MUSIC...
Music Playing music Operations during music play Displaying photos (Slideshow) Photos stored on the “Album” of the HDD can be [HDD] [USB_HDD] [DVD-R] [CD] [USB] played back as slideshow during playback of the Stop music. Press [STOP ∫]. While playing the music Press the red button.
Music Editing music/playlist Delete All Tracks 1 If the confirmation screen appears: Select “Yes”, then press [OK]. On the DIRECT NAVIGATOR screen: 2 Select “Delete”, then press [OK]. Press [OPTION]. e.g., Delete Album DIRECT NAVIGATOR Music Menu MUSIC Total Tracks 53 Select “Delete”, then press [OK].
(optional) • It may take time for the copying to start. To stop copying • If you connect a Panasonic product with a USB connection cable, setup screen may be displayed on the connected Press and hold [RETURN ] for 3 seconds.
With Other Equipment Copying SD Video (MPEG2) To edit the copying list [USB_HDD] [SD] [USB], video camera, etc. > [HDD] Select “List”, then press [1] (right) after step 2. • The original file must be in the SD-Video left) standard. 1 Select the title, then press the yellow button.
• Ensure that the router for your home network has adequate DLNA function compatible software should be security system to prevent unauthorized access. § installed. For more details, refer to the Panasonic website. ( left) Preparation • When DLNA (Server) Function is deactivated, make the settings. (...
• You may not be able to use the Control Panel even if you You can share videos, photos and music stored in use the Panasonic DLNA compatible equipment. the DLNA Certified media server (such as a PC • Depending on the contents and the connected equipment, with Windows 7 installed etc.) connected via a...
With Other Equipment Smart Home Networking (DLNA) Using this unit as Media Renderer • Depending on the contents and the connected equipment, playback may not be possible. This unit will work as Media Renderer, which • Items displayed in grey on the display cannot be played allows you to play back the contents on DLNA back by this unit.
This unit’s rear panel discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. • All features of websites or content of the service may not be available.
Convenient functions Format SD card Formatting deletes all contents (including computer data), and they cannot be restored. Check carefully before proceeding. Press [FUNCTION MENU]. Select “SD Card” in “Drive Select”, then press [OK]. Select “SD Card Management” in “Others”, then press [OK]. Select “Format Card”, then press [OK].
• For details about connection method, refer to For the latest information on recommended the instructions supplied with the USB HDD. USB HDDs, please check the following website. http://panasonic.jp/support/global/cs/ Disconnecting the USB HDD Please use the following procedure to disconnect. • Certain non-recommended USB HDDs cannot Disconnecting without following this procedure be used with this unit.
Convenient functions Registering the external HDD (USB HDD) Registering the USB HDD To cancel all USB HDD registrations Refer to “Cancellation of all USB HDD • If the registering screen appears when Registrations”. ( connecting the USB HDD, go to step 4. Press [SETUP].
• This unit supports “HDAVI Control 5” function. Power off link “HDAVI Control 5” is the standard for Panasonic’s HDAVI When you set the TV to standby mode, this unit is Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.
Convenient functions Playback menu A variety of operations and settings such as Disc changing the subtitles and audio languages can Video be performed during playback of video or music. The original video recording method Also, picture and sound quality can be set to your (MPEG-4 AVC etc.) appears.
Page 65
Convenient functions Play Picture Mode Repeat Play Select the picture quality mode during play. Select the item which you want to repeat. • Normal Random Default setting. Select whether to play random or not. • Soft Graphic Display Level Soft picture with fewer video artifacts. You can change the 3D position of the playback settings display, etc., during the 3D •...
Page 66
Convenient functions Playback menu Sound Audio attribute Sound Effects • This function is effective when “Digital Audio LPCM/ Digital/ Digital+/ TrueHD/ Output” is set to “PCM”. ( DTS/DTS-HD/MPEG/ Re-master 1/Re-master 2 Signal type HE-AAC: Sound becomes more natural by adding k (kHz): Sampling frequency higher frequency signals not recorded on...
Convenient functions Changing the unit’s settings You can change the unit’s settings of Digital TV Menu list Tuning, Sound, Display, Connection, Network etc. The locations of the setting items are as follows. in the menu. For details on each setting item, please refer to Common procedures the following pages.
Page 68
Convenient functions Changing the unit’s settings Picture Network Still Mode ( Easy Network Setting ( Seamless Play ( Network Settings ( LAN Connection Mode ( Sound Wireless Settings ( Dynamic Range Compression ( Connection Setting ( Downmix ( Double Speed Mode Setting ( 2.4GHz ) ( Digital Audio Output ( IP Address / DNS Settings ( PCM Down Conversion (...
Convenient functions Digital TV Tuning • To delete channels: Select the channel in the “Favourites” column, Favourites Edit then press [OK]. • Yellow: Delete all channels. You can create four favourites of channels for making viewing and recording easier. • To change the name of the Favourites list: Digital TV Favourites Editor 1 Press the red button in the “Favourites”...
Page 70
Convenient functions Changing the unit’s settings Channel List Update Channel List You can edit the channel list. You can update the channel list to the latest one. Digital TV Channel List Child Lock ( Parental Rating ) You can restrict the viewing of channels unsuitable to children.
Settings for Playback following two video formats; - High Definition video (AVCHD) recorded by 3D BD-Video Playback the Panasonic video camera, etc., Select the playback method of 3D compatible - High Definition quality video recorded on video software. this unit, select which video to play back.
Page 72
Convenient functions Changing the unit’s settings Settings for USB HDD Timer Record Start Buffer This function sets the timer recording to start USB HDD Registration earlier than the TV Guide time. Register the USB HDD. ( Timer Record Stop Buffer USB HDD Disconnection This function sets the timer recording to stop This function puts the USB HDD in a state in...
Convenient functions Picture Sound Still Mode Dynamic Range Compression Select the type of picture shown when you pause To lower the dynamic range for playback (e.g., at play. night). • Field: • This does not work depending on broadcasts and recorded titles. Select if jittering occurs when “Automatic”...
Convenient functions Changing the unit’s settings Connection Dolby D / Dolby D + / Dolby TrueHD DTS / DTS-HD 3D Settings MPEG Select the audio signal to output. 3D Type • Select “PCM” when the connected If 3D video cannot be played back in 3D, you equipment cannot decode the respective may be able to play it in 3D by changing the audio format.
Page 75
Convenient functions HDMI Connection HDMI Audio Output Select “Off” when connected to an HDMI Video Format amplifier/receiver with a DIGITAL AUDIO You can only select items compatible with the OUT terminal. connected equipment. 7.1ch Audio Reformatting • If “Automatic” is selected, the output resolution best suited to the connected TV [BD-V] (1080p, 1080i, 720p or 576p/480p) is...
Convenient functions Changing the unit’s settings Network IP Address / DNS Settings Check the connection of the network or set Easy Network Setting the IP address and DNS. Press [OK] to start Easy Network Setting. ( • To set the IP address and DNS 1 Set “IP Address Auto-assignment”...
Page 77
For details please check the following • Select from a preset list website. Select the preset name, then press http://panasonic.jp/support/global/cs/ [OK]. (This site is in English only.) • Create name • However, as of February 2013, the service Enter the name.
Convenient functions Changing the unit’s settings Others Automatic Standby after OTR • On: Standby Settings This unit is turned to standby mode when it is not operated for approximately 5 minutes Quick Start after completing “Automatic Stop” or • On: “Recording Time”...
Page 79
If the time is not set correctly, use the settings and the remote control if you place other listed in the method below. Panasonic products close together. • Automatic • Use “Set Code1”, the factory set code, under This unit usually obtains time and date normal circumstances.
Page 80
Convenient functions Changing the unit’s settings PIN Entry System Update You can set/change the PIN for parental control. Software Update in Standby 1 Enter your 4-digit PIN with the number When you set this unit to standby mode, buttons. software (firmware) updates ( 82) are 2 Enter the new 4-digit PIN with the number downloaded automatically at the time you...
Convenient functions Initialize Language code list Shipping Condition Abkhazian: 6566 Lingala: 7678 All the settings except for basic settings Afar: 6565 Lithuanian: 7684 Afrikaans: 6570 Macedonian: 7775 return to the factory preset. Albanian: 8381 Malagasy: 7771 • The timer recording programmes are also Amharic: 6577 Malay:...
• The timer recording always takes preference over the software (Firmware) download; if the timer recording is scheduled to start, the downloading will be performed at the next opportunity. • You can also download the latest software (firmware) from the following website. http://panasonic.jp/support/global/cs/ VQT4L31...
Convenient functions Other operations Entering text Switching the aspect ratio of the screen Preparation • Show the “Enter Title Name” screen, etc. When the image does not match the screen size of the TV, you can enlarge the image to fill the Select a character, then press [OK].
Troubleshooting Troubleshooting guide Troubleshooting Before requesting service, make the following General operation checks. If the problem still persists, consult your dealer for instructions. The unit does not work. Updating to the latest software (firmware) may • Check the connections. ( solve the problem.
Troubleshooting The remote control does not work. Displays • The remote control and main unit are using different codes. Change the code on the remote “0:00” is flashing on the unit’s display. control. • Set the clock. ( 67, 79) Press and hold [OK] and the indicated number The clock does not display on the unit when...
Troubleshooting Troubleshooting guide The screen changes automatically. 3D video is not output correctly. • 3D video may be output correctly by changing • If “Screen Saver” set to “On”, the screen saver the following settings: function will be activated when there is no - “3D Type”...
Troubleshooting Recording, timer recording and Play copying Cannot play back. • The disc is dirty. ( Cannot record. • The disc is scratched or marked. Cannot copy. • [BD-R] [BD-RE] • Some broadcasts are copyright protected. Set “Play Video ( AVCHD ) on BD-RE / BD-R” to •...
Troubleshooting Troubleshooting guide Edit Photo The contents of the SD card cannot be read. Cannot edit. • Remove the card from the slot and then insert • You may not be able to edit on the HDD if there again. If this does not solve the problem, switch is no available space.
In this case, change TV (VIERA) setting for Broadcast “HDAVI Control” again. • This unit does not support “ONE TOUCH PLAY” Picture regularly breaks up on some function of the Panasonic AV Control Receiver. channels. • Adjust the reception with “Manual Tuning”. 67, 70) Network You cannot access this unit from DLNA compatible equipment on the network.
Troubleshooting Troubleshooting guide You cannot play contents properly from DLNA Messages on the unit’s display compatible equipment on the network. • There may be some video that cannot be played The following messages or service numbers appear on the unit’s display when something back on DLNA compatible equipment unusual is detected.
Page 91
Troubleshooting PLEASE WAIT • Displayed when the unit is started and is The unit is hot. switched to standby mode. The unit switches to standby for safety reasons. Wait for about 30 minutes until the message • There was a power failure or the AC plug was disappears.
Troubleshooting Troubleshooting guide When you experience problems with Easy Network Setting (When a disc is inserted) There was something unusual detected with the disc or the unit. The If there is any problem, the following message is unit is trying to restore to the normal operation. displayed on the screen.
Page 93
Troubleshooting Easy Network Setting ( Home Network Easy Network Setting ( Internet Connection Connection Check ) Test ) Check the Display Check the following Display following Cannot find the • “Primary DNS” and 1. LAN cable • Connection server. (B019) “Secondary DNS”...
Reference Specifications Reference Specifications are subject to change without ∫ Audio notice. Analog audio L/R out (pin jack): 1 pc. Output level: ∫ General Full scale 2.0 Vrms at 1 kHz (< 1 k≠) Dimensions: 430 mm (W) Digital audio out (optical): 1 pc.
Page 95
Reference ∫ LASER specification ∫ SD Card Class 1 LASER Product Compatible media: SD Memory Card § Wave length: Format: 405 nm (BDs) SD Card: only FAT12, FAT16 660 nm (DVDs) SDHC Card: only FAT32 790 nm (CDs) SDXC Card: only exFAT Laser power: Data that can be played:...
Page 96
Reference Specifications About recorded titles Information for the files other than recorded programmes ∫ Recording quality and approximate recording times ∫ JPEG/MPO Depending on the content being recorded, the Playable media: HDD, BD-RE (SL/DL), DVD-R, DVD-R DL, CD-R, recording time may become shorter than CD-RW, SD Card, USB device indicated.
Page 97
SD-Video format § Sampling rate: 16 kHz, 22.05 kHz, 24 kHz, used on Standard Definition Camera 32 kHz, 44.1 kHz, 48 kHz (Panasonic and some other’s) Maximum numbers of folders and files: SD-Video Entertainment Video Profile § Maximum Maximum Media...
Reference Licenses “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Copyright 2004-2010 Verance Corporation. Cinavia is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
Page 99
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under LGPL.
Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period.
Page 104
The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.