Channel Coupling Settings - Rigol DG1022 User Manual

Channel Coupling Settings

Press Utility  Coupling, enter the following interface.
Menu
Coupling On
Switch
Coupling Off
Channel_1
BaseCH
Channel_2
FreDev
PhaDev
1
CopyCH
2
Key Points:
1. Channel Coupling
(1) The coupling is only used for frequency and phase, as shown in the following
figure, the base channel will mark with a "*" sign on the screen. It indicates that
CH1 has coupling in the phase parameter.
© 2008 RIGOL Technologies, Inc.
Channel Coupling Setting Interface
Table 2-24 Channel Coupling Setting Menu
Settings
Open or close the Coupling function
Choose CH1 or CH2 as the base source in
coupling
Set the frequency deviation between the two
channels.
Set the phase deviation between the two
channels.
Copy the parameters from CH1 to CH2
2
1
Copy the parameters from CH2 to CH1
Save the setting and exit
Coupling Sign Instruction
User's Guide for DG1022
Figure 2-60
Explanation
Coupling Sign
Figure 2-61
RIGOL
2-55