Changing The Light Bulb At The Top Of The Oven - Bosch Oven Instruction Manual

Error messages
Error message
E011
Changing the light
bulb at the top of
the oven
If an error message with “ appears in the display,
press the 0 button. The message disappears. Any
time function that has been set is cleared.
If an error message does not disappear, call the
after sales service.
You can provide a remedy yourself for the following
error message.
Possible cause
A button was pressed
for too long or is
covered.
d
There is a risk of electric shock.
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our experienced after sales
engineers.
The oven light bulb must be replaced if damaged.
Replacement heat-resistant light bulbs are available
from the Technical Assistance Service or from
specialist retail outlets.
Only use lights obtained from the above.
d
1. Risk of electric shock!
Switch the appliance off at the mains. Ensure that
it has been switched off.
2. Place a dishcloth into the cold oven to avoid
damage.
3. Remove the protective glass panel by unscrewing
it to the left.
Remedy/information
Press all buttons individually. Check
whether a button has jammed or is
covered or dirty.
29